Rugged Ridge 17235.20 Rocker Switch Housing Mount
Quadratec Part #:
97015-0104
Rugged Ridge Part #:
17235.20
In Cart Price
$21.99
Guaranteed Best Price
$21.99
Temporarily
Out of Stock
Out of Stock
Description
If you want to mount rocker switches to other locations in your Jeep, the Rugged Ridge housing kit allows you to mount 2, 3, or 4 switches to numerous dash locations by using a series of interlocking interchangeable pods.
Popular Similar Items
Details
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rugged Ridge Rocker Switch Housing Mount Reviews
Justin W.
5/15/2024
Hold rugged ridge toggle switches perfectly. Gives a clean look when installed on ‘95 YJ.
Alexander D.
10/1/2019
Fit perfect, nice way to add switches as you need them.
Geoff L.
6/21/2017
Bought them for future use, so I haven't set them up yet. But they look like they will work well.
Questions
Kenneth C.
What are the outside dimensions of these bezels? What size cutout and what size flange? I know they are for standard switches, but I need to know if they will fit in a specific area of my dash.
The Rugged Ridge 17235.20 Rocker Switch Housing Mount relies on interlocking modular pods designed for standard Carling-style (contura) rocker switches, which typically require an individual switch cutout of about 0.83 inches by 1.45 inches.
Because these housings are built as an interlocking modular system where individual bezels snap together, precise manufacturer specifications for the outer flange dimensions and total panel cutouts are not officially published as a single fixed blueprint. For a single switch pod, the cutout needed is roughly 0.87 inches x 1.70 inches, with a small perimeter flange (typically adding about 1/8 to 1/4 inch around the edge) to sit flush against the dash surface.
Because these housings are built as an interlocking modular system where individual bezels snap together, precise manufacturer specifications for the outer flange dimensions and total panel cutouts are not officially published as a single fixed blueprint. For a single switch pod, the cutout needed is roughly 0.87 inches x 1.70 inches, with a small perimeter flange (typically adding about 1/8 to 1/4 inch around the edge) to sit flush against the dash surface.
Tim H.
What are the dimensions of the product? For example, how big is the cut-out hole for a two-switch mount and what are the outside dimensions of the flange once installed?
It is designed to work with standard Carling-style rocker switches, which have a common rectangular face size (typically around 0.83" x 1.45" or 21mm x 37mm).
Eric R.
how many of the mounts are in one kit? i see some are end caps and the others have mounts on both sides
Hello, this kit is 2 end pieces and 2 middle pieces for a total of 4 switches. Thank you for your question.
