Home » Jeep Tools » Air Compressors » Air Lines, Fittings & Attachments » PowerTank Super Flow HP250i Comp Series CO2 Regulator Kit

PowerTank REG-7000 Super Flow HP250i Comp Series CO2 Regulator Kit for Power Tank

Quadratec Part #: 92042.9156
PowerTank Part #: REG-7000
This high-quality, 250psi, Super Flow Regulator is the most up to date version of the 20+ year tested PowerTank Regulator. Screws on to almost any CO2 bottles produced in the USA. If you are only able to refill CO2 from gas supplies who require tank exchanges you can rente a CO2 tank, install the Power Grip Guard and Regulator at home. When the bottle empties, just bring it back to the gas supplier to exchange for a filled tank - the same process as with a propane tank. This regulator is designed to never freeze-up, unlike a majority of regulators on the market today. Flow rate is 45 CFM with a max outlet pressure of 250 psi which is more than enough for most air tools. You can reseat up to 46-inch tire & run impact guns on max power. Compare this to a top of the line portable air compressor which runs at 4.65 CFM at 29 psi with a max output pressure of 150 psi. This regulator can also work for Nitrogen bottles with a quick change of the CO2 nut & nipple assembly to an N2 nut & nipple assembly. Or, you can use a CO2 to N2 converter as a Nitrogen regulator. The Power Grip Guard Handle and Power Tank regulator both have a Limited Lifetime Warranty. The hose comes with a 2-Year warranty. Made in the USA!
  • Maximum Outlet Pressure: 250 psi
  • Maximum Flow Rate: 45 cfm
  • Parts Included
    • Super Flow HP250i regulator
    • Solid Aluminum Power Grip Guard
    • 30 Foot High-Pressure Hose with coupler and fittings
    Limited Lifetime Warranty. Note: Warranty void if you are not using a Power Grip Guard.
    • Shipping Weight: 8lb
    • Shipping Dimensions: 14in x 9in x 9in (L x W x H)
    Share Your Thoughts
    Review Summary
    Shared Media

    Customer Submitted Photos

    PowerTank Super Flow HP250i Comp Series CO2 Regulator Kit Reviews