Skip to main content
Home » Jeep Lighting, Lenses, Bulbs » Tail Lights » LED Tail Lights » Mopar LED Tail Light
« Back to product
I want to replace my halogen tail light s with led lights can I do that
Yes. A programming tool to change your factory lighting parameters will need to be used to complete the installation. Thanks for your inquiry.
I have halogen and standard headlights and tail lights. Can I install these and the led headlights as an upgrade.
Yes these are plug and play and do not require any sort of additional programming. Thank you for the question.
2020 JL S SPORT UNLIMITED with blindspot detection. Does this taillight support my application?
No. The model you would need is in the following link.Mopar Tail light with lane change avoidance Thanks for your inquiry.
I'm replacing the Factory passenger LED Tail Lamp w BSM; In one response to questions your team said that a bracket needs to be used off the original BSM lamp, another response says its plug and play, and the descriptions says its without BSM. Can I get some clarification on whether the fitment will replace a BSM tail lamp or if you need to reuse original parts? Thanks
Blind Spot Monitoring equipped vehicles require 68474044AA and 68474045AA.
I have a 2020 Rubicon with the LED package no sensors. Is this a direct replacement? Will I need to have dealer flash after replacement?
For your application this would be a direct replacement, it will not need any flash or dealer visit as you are already running the LED package
I need to replace my failed LED light. Can I swap the avoidance sensor into this light?
Yes sensors can be moved over, but there is a a bracket that must be moved over along with the sensor.
Do you need to have the dealership flash if your JL has factory LED headlights and fog lights, but halogen tail lights?
Yes you will
Hi! I love the website but I was wondering to know before I buy if this would fit on my 2020 Wrangler unlimited WILLYS EDITION. Thank you!
Yes this will fit your Willy's edition, but you will need to visit the dealership to flash your computer to recognize the lighting change.
Is the backup light also LED, or is it incandescent?
They are LED as well.
I have the OEM LED tail lights and my passenger has a break -chip on it. I have the back up sensor and its working weel. Could I buy the housing of the cheapest LED rear OEM and replace the components or does the part with the sensor is very different? (trying to save some bucks) - appreciate your help - thanks
You can relocate your sensor, wiring and bracket from the old light into a base model light. The housing is the same. You will need the bracket, wiring and hardware to reuse.