« Back to product
Patti K.
If I order this hitch now without the wiring is the wiring available separately? To buy later?
Yes, the wire harness can be added at a later time.
Anthony F.
Overall length of receiver tube?
The overall length of the receiver tube is 5.5 inches.
Paul H.
Assuming it will fit a 2026 two door Sport S?
Yes, the Quadratec Premium 2" Receiver Hitch will fit your 2026 Jeep Wrangler Sport S 2-door.
Alan R.
what class hitch is this. Thx
The Quadratec Premium 2" Receiver Hitch for the 2018–2024 Jeep Wrangler JL is a Class II (Class 2) hitch.
David L.
This fits the 2025 JL Sahara, yes? Do I need to remove the rear bumper for installation?
Yes, the Quadratec Premium 2" Receiver Hitch will fit your 2025 Jeep Wrangler JL Sahara.
No, you do not need to remove the rear bumper to install this hitch. It is a direct bolt-on application that typically takes about 30–60 minutes to complete.
No, you do not need to remove the rear bumper to install this hitch. It is a direct bolt-on application that typically takes about 30–60 minutes to complete.
David L.
I have a 2025 Sahara. The install video makes it look pretty easy, even without a lift, but do I need to remove the factory bumper first? Doesn't really say, and I think it's off in the video but that just might be to make the install easier to see.
No, you do not need to remove the factory bumper to install the Quadratec Premium 2" Receiver Hitch for 18-24 Jeep Wrangler JL on your 2025 Sahara.
Clearance and Access: The hitch is engineered to slide up and mount directly to the rear crossmember and frame rails from underneath. The bumper stays firmly in its stock location.
Video Setup: Install videos often remove the bumper purely to give the camera a clear, unobstructed view of the bolt locations and wiring connections for instructional purposes.
Clearance and Access: The hitch is engineered to slide up and mount directly to the rear crossmember and frame rails from underneath. The bumper stays firmly in its stock location.
Video Setup: Install videos often remove the bumper purely to give the camera a clear, unobstructed view of the bolt locations and wiring connections for instructional purposes.
Norman C.
Will this wiring harness work on a 4Xe
Yes, the wiring harness included with the Quadratec Premium 2" Receiver Hitch is compatible with the Jeep Wrangler 4xe.
Even though the 4xe has a complex plug-in hybrid powertrain, its taillight connectors are identical to those found on the standard gas-powered Wrangler JL. Since the Quadratec harness uses a plug-and-play design that taps directly into these taillight assemblies, it works without needing any special modifications for the hybrid system.
Even though the 4xe has a complex plug-in hybrid powertrain, its taillight connectors are identical to those found on the standard gas-powered Wrangler JL. Since the Quadratec harness uses a plug-and-play design that taps directly into these taillight assemblies, it works without needing any special modifications for the hybrid system.
Josh M.
I have a 2021 Jeep Wrangler JL Willy edition. Will this hitch fit my Jeep?
Yes, it will.
Karl H.
Can i get it with the 7 blade adapter or a combination of both the 7 blade and 4 point?
The Quadratec Premium 2" Receiver Hitch (Quadratec part # 12015-1070) for the 2018-2024 Jeep Wrangler JL does not come with a 7-blade adapter or a combination of both a 7-blade and 4-point connector by default.
However, you can purchase a wiring harness that supports the 7-blade and 4-point connections separately. Quadratec offers wiring kits that provide this flexibility, such as:
Quadratec 4-Point & 7-Point Plug-N-Play Tow Hitch Wiring Harness Kit (Quadratec part # 92015-8002). This harness includes both the 7-blade and 4-point connectors, allowing you to have both options available for different towing needs.
Terry M.
will it fit 2 door 2024 JL
Yes, it will. Thank you for your inquiry.