« Back to product
Oso D.
Is the halo a running light? Or does it only come on when the parking lights are on?
How the halo functions depends entirely on how you choose to wire it during installation:
Parking Light / Manual Control: If you tap the halo power wire directly into your factory parking lights (as recommended in Oracle's standard instructions), the halo will turn on whenever your parking lights or headlights are switched on. This gives you manual control over them during daytime driving.
Automatic / DRL Mode: If you wire them into an ignition-switched source or a dedicated daytime running light (DRL) circuit (such as using fuse F52 in the engine compartment fuse panel on modern Wranglers/Gladiators), the halos will function as true running lights, turning on automatically whenever the vehicle is on.
(Note: Oracle specifically notes that you should avoid using a raw DRL wire directly as an unconditioned power source, so tapping into the park lights or utilizing the proper fuse slot ensures they operate safely without voltage issues.)
Parking Light / Manual Control: If you tap the halo power wire directly into your factory parking lights (as recommended in Oracle's standard instructions), the halo will turn on whenever your parking lights or headlights are switched on. This gives you manual control over them during daytime driving.
Automatic / DRL Mode: If you wire them into an ignition-switched source or a dedicated daytime running light (DRL) circuit (such as using fuse F52 in the engine compartment fuse panel on modern Wranglers/Gladiators), the halos will function as true running lights, turning on automatically whenever the vehicle is on.
(Note: Oracle specifically notes that you should avoid using a raw DRL wire directly as an unconditioned power source, so tapping into the park lights or utilizing the proper fuse slot ensures they operate safely without voltage issues.)
James C.
WILL THE LIGHTS FIT A 2005 WRANGLER?
Yes, the Oracle Lighting 7" High Powered LED Headlight Pair will fit your 2005 Jeep Wrangler (TJ).
Zachary B.
Where is the adjustment knob for these?
The Oracle Lighting 7" High Powered LED Headlight Pair do not feature an adjustment knob or screw directly on the headlight housing itself.
Instead, the beam alignment is adjusted using the factory headlight housing bucket screws on your Jeep (accessible behind or around the headlight bezel), which tilt the entire headlight assembly up, down, or sideways to adjust the beam level.
Instead, the beam alignment is adjusted using the factory headlight housing bucket screws on your Jeep (accessible behind or around the headlight bezel), which tilt the entire headlight assembly up, down, or sideways to adjust the beam level.
Aaron F.
I have 1982 cj8. Do these require another adaptor to replace factory lights ?
Yes, a standard H4-to-H13 (or H4-to-H4 depending on your existing wiring setup) adapter or anti-flicker harness is typically not needed for a 1982 CJ8, but you will need standard H4-to-H5001/H6024 headlamp socket converters if your CJ8 still uses the older factory three-prong terminal plug style common to vintage Jeeps.
Jesse C.
Are these DOT compliant?
Yes, the headlights are DOT-compliant.
William M.
Without the halo will I need to modify anything on my 2010 Jeep Wrangler?
Nope, these are a direct fit replacement.
Robert M.
I have a 1976 CJ7. Will the adapters work for my vintage jeep?
Adapters are not needed for CJ use. I would expect a trimming modification to OE headlamp buckets to be needed for install on a CJ model. Thanks for your inquiry.
Steven B.
I have a 2012 4-door wrangler. Do I need to connect the T-Taps for the Parking Light wiring harness? The instructions are not clear on how to do this.
Thank you in advance,
Steven
Yes, as referenced in step 12. Thanks for your inquiry.
Richard S.
What is the housing environment rating, IP 67 or IP 68?
IP68. Thanks for your inquiry.
Brennan H.
Wil this fit a 2004 Wrangler, without modifications?
Yes, they will. Thanks for your inquiry.