Skip to main content
Home » Jeep Bumpers » Rear Bumpers & Tire Carriers » Rear Bumper Accessories » Mopar Steel Rear Bumper Fascia
« Back to product
Do you have the specific Mopar steel bumper version that is pre-cut with factory parking sensor holes. How much it costs?
Thanks for clarifying! The Mopar steel rear bumper fascia with factory Park Assist sensor holes is Mopar part #68295568AC (Quadratec part #12112-0306). It is listed for 2018–2026 Jeep Wrangler JL models.

Mopar 68295568AC Steel Rear Bumper Fascia for 18-27 Jeep Wrangler JL with Park Assist System
I have a rubicon 2 doors 2026 , with plastic rear bumper + parking sensors. I am thinking of upgrading to steel one , but want to continue having the sensors. Is it possible?
Yes, it is possible, but you must ensure you purchase the specific Mopar steel bumper version that is pre-cut with factory parking sensor holes.

Mopar offers the Mopar Rubicon Steel Rear Bumper in configurations specifically designed to accommodate factory rear park assist sensors, allowing you to swap your sensors and wiring harness directly over from your plastic bumper.
When will it be available?
These are available and able to order, once an order is placed with us, we will order from the factory, which takes approximately 2 weeks. We do not stock these for fast shipping at the moment
I have a 2021 JLU with plastic bumpers with park assist. Does this facia get me to a steel rear bumper?
Not without purchasing all of the other component parts of this bumper. Unfortunately you cannot simply swap out the fascia
I have a JLUR with the steel bumper set. Some jackass bent back my rear bumper in a parking lot. Not terribly, but it's slightly buckled. Can I just get the fascia to replace the bent portion of my bumper, or do i need the whole kit?
No, by all means, if you have this bumper you can use whatever parts you need to be whole again. Here is the diagram if you have not seen it Click Here
Hello, I do have a Rubicon Unlimited JL 2020 with rear parking sensors. However, my stock plastic rear bumper looks totally different from this #68295568AC. My rear bumper looks like this so I think its a Australian style. This is the link of how it looks like https://youtu.be/x0AaFS2MrLo My question are: 1) If I get this bumper with sensors holes, does it fit on my JLU? 2) What are the other parts I need to complete the whole rear bumper? Because I couldn't not see the fog rear lights, reverse light, license cover and other parts that i do not know. It seems like outer bumper only. I have found rear bumper #82215342 and it looks full bumper but it doesn't have rear parking sensors.
You would need the parts shown here. Click Here for Steel Bumper Parts
I have a Jeep Rubicon de luxe 2-point JL 2020 and I want to change to a metal housing, my question is if this fits perfectly or do I have to buy more parts
You would have to purchase all of the parts to change the bumper, they components are not interchangeable.
Do you sell the snap in plate mount for this bumper? Or maybe an upgraded one that will stay on while wheeling?
Unfortunately the only panel to offer is the original stock mount #68296053AB.
Can I reuse the sensor brackets from the plastic bumper or do i have to get new brackets?
According to Jeep the brackets are only for the plastic bumper and the sensors do not require (or are not listed) brackets for the steel bumper. The decoupler ring can be interchanged between bumpers
I have slight damage to original plastic bumper. Will the Mopar steal bumper replace.
Even though they appear similar in design there is a difference in how they are mounted behind the scenes. You can compare the parts on the diagrams here: https://www.quadratec.com/jeep-replacement-parts/wrangler-jl/injection-molded-rear-bumper-parts https://www.quadratec.com/jeep-replacement-parts/wrangler-jl/steel-rear-bumper-parts