Reviews for Mopar 68240905AA 2" Receiver Hitch for 18-22 Jeep Wrangler JL

Perfect fit, very strong built

Installed easily and fits very well. No bolts included, if needed buy the 06104256A's offered by Quagratec.

Great that its a Mopar product

Product would be better if it came with the bolts. Description said it used the bolts that were on the vehicle. There were no bolts on the vehicle. Quadratic sells the bolts at 16 bucks each while the sell a similar bolt at *(20 mm longer) for 5 bucks. I bought the bolts from a another vendor for 6 dollars, because i was so mad.

Rating would be a 5 except for poor description. It says for replacement, when in fact this is the one for a never been installed wrangler, and rubicon with steel bumpers to boot. You do not need to order more than 2 bolts, there are two bolts holding a shim, you reuse those. Never had a hitch on your JL? Buy this and two bolts and rubber hitch cover, save yourself Hundred plus.

I recommend this product. It is rare that you can price out a purchase and save on the packaged offering but this is the case with this. My Jeep did not come with the factory tow package so I’ve installed the AUX pod (dealer installed) hitch (subject of this review) and it’s wiring harness, the latter two myself. Well priced as mentioned and came quickly and with no damage to the content and paint. Very satisfied, it took about 10-15 minutes to install. My only pro tip so to speak is to tread in all bolts before tightening. I also purchased the bolts (MOPAR SPEC) thru Quadratec. All were still below packaged OEM pricing and for more items.

Fits my Jeep fine, but it doesn't fit my bike. I have a Trek Verse 3 hybrid and the front tire is seated in the front holder, but the rear tire is almost off the end. The bike is not centered on the rack. In fact the rear tire extends past the jeep on one side. Gonna catch the wind and push it back. The front tire holder needs to be moved forward about 4". Need to drill new holes to bolt the holder over where it should be. Never saw any dimensions to check against the wheelbase of the bike. Not having a holder for the rear tire to sit in, makes it a little sketchy. Will have to add a couple more straps to anchor it safer.

Very disappointed that the threads of the welded on nuts were completely fouled with the black enamel. Had to buy a tap and run it through to clear the threads and get the bolts to screw in properly.

This is a great product the only reason I’m giving it three stars is it doesn’t come with hardware to install. If you buy this item you will need to buy two bolts to finish the installation process

The 4 metric bolts need to be included with the hitch to complete the project. The metric bolts were not included with the hitch nor with the Jeep Wrangler. Since I live in a small town, I could only find 2 metric bolts that would fit. Frustrated!
Hitch itself was of good quality