« Back to product
Brian H.
I wanted to get these 3” cubes and tie into aux switch. Does this set come with everything needed? Are the wires long enough for a ‘21 Gladiator?
No, it does not. If ordered along with a wiring harness, the extension wires could be used and you could modify the harness to use your aux switches instead, but the lights in this kit will not have the needed extension wiring. Thanks for your inquiry.
Michael M.
Would this lights fit the Go Rhino 331200T Rockline Winch Ready Front Bumper
They certainly should, but extended wiring harness would be suggested for use illuminating this pair of lights designed for off-road usage. Thanks for your inquiry.
Chris S.
I want to mount these to the stock fog light connector on a 2010 Wrangler JK. What converter/connector do I need to go from Deutsch to the stock plug? Thanks.
Since these are an auxiliary lights are designed and intended to be reserved for off-road usage only, we do not have a plug and play harness that will allow their connect to factory fog lamps. Sorry for the inconvenience.
Mark N.
I am thinking of installing your Quadratec 3" Cube LED Kit on my 2019 Wrangler Unlimited on either side of the windshield. What brackets are available to install these lights. Thank you
Yes, this light mount pair we offer will work with these cube lights.JL windshield light mount brackets Thanks for your inquiry.
Paul N.
does the 3" cube led kit fit the Jeep Wrangler Sport 2018?
Not without the use of a wiring harness. See a more complete kit. Cube LED lights with wiring harness . Thanks for your inquiry.
Chris S.
I am wanting to get a set of flood and a set of spot lights for my 2020 JLU and want to hook them up to my Rough Country 70964 MLC-6 Multiple Light Controller,,,, Will the pig tails be enough to connect them to the controller, or will i need something else to make them work?
Thank you for your help...
Additional wiring would be needed to reach the controller. Thanks for your inquiry.
Rachel R.
Do these lights fit the smittybuilt SRC carbine rear bumper? If so, Do I need to buy anything else to go with them? Thanks.
The lights will fit with the openings on the Carbine bumper. A wiring harness would be required for use with the lights. See the following link for the light kit with wiring. 3" Cube with wiring harness Thanks for your inquiry.
Thomas P.
Does this come with a switch for this? Also does it come with all the wires it needs
No. This is the lamps with deutsch connectors only. The kit with a wiring harness is in the following link. https://www.quadratec.com/products/97109_106X_A_PG.htm. Thanks for your inquiry.
John V.
What’s the difference between these and Quadratec Part #: 97109.1067?
Both are 90 degree, 5400 lm & 60w.
97109.1067 is specific to a vehicle, in this case, TJ's. It comes with an adapter plug that is plug and play between the light's wiring harness and the factory Jeep plug. This allows you to use your factory fog light switch with no cutting or splicing required.
Patrick R.
Can you adjust the angle on these lights? I would like to angle them down.
Yes, the angle of the light is adjustable.