« Back to product
Harold O.
Will this bolt the transmission cross member back up on the side
Yes, the Mopar 6104444AA Hex Head Screw & Washer (which is an M12x1.50 x 40mm factory flange bolt) is commonly used across JK, JL, and Gladiator models for frame-mounted components like skid plates, frame brackets, and crossmember/skid system attachments. However, whether it fits your specific location depends on which exact mounting point or side hole you are replacing, as Jeep uses multiple fastener sizes along the frame rails.
Paul L.
are these for the 2022 gladiator front skid plate?
Yes.
The Mopar 06104444AA Hex Head Screw & Washer is used for several applications on various Jeep models:
Mounting Skid Plates to the Frame: This is a common application for this bolt.
Fuel Tank Brackets to the Frame: It is used to secure both front and rear fuel tank brackets.
The bolt is an M12 x 1.5 x 40.0 size.
The Mopar 06104444AA Hex Head Screw & Washer is used for several applications on various Jeep models:
Mounting Skid Plates to the Frame: This is a common application for this bolt.
Fuel Tank Brackets to the Frame: It is used to secure both front and rear fuel tank brackets.
The bolt is an M12 x 1.5 x 40.0 size.
Erik C.
Is this the bolt for attaching the stock Rubicon rock sliders to the frame?
No. Rubicon rock rails use the following hardware. 12112-0491 Thanks for your inquiry.
Norman S.
What bolts and nuts are required for lower oil pan?
The following bolt is used for the lower oil pan on 12-18 JK 3.6L models. See the following link. Oil Pan Hex bolt. Thanks for your inquiry.
David C.
Is this the same bolt as on the JL/JT skid plates?
Yes, this application is used for JL/JT models as well. Thanks for your inquiry.