Skip to main content
Home » Jeep Lift Kits & Suspension » Lift Kits » Spacer Lifts » Quadratec Maximum Duty 1.75in Front / .75in Rear Leveling Lift Kit
« Back to product
will this lift be ok with a steel bumper amd winch or will there be some rake
If the bumper and winch combo is heavier than a factory bumper, you may experience a bit less correct of the rake or nosedive on those models than you would on a factory plastic bumper. Thanks for your inquiry.
Planning to install on my 2014 JKU. Then need new tires on my stock wheels. I understand 33" tires will work with this leveling kit. What is the max tire width before rubbing is an issue?
If a 33" is wider than 11.5" on a factory wheel, you will experience slight rub at full steering wheel lock to the right in tight parking spots. 33" should not have wheel travel rub concerns but without wheel spacers or an aftermarket wheel with a little lower backspace, you may have that slight rub turning in tight maneuvers. It's very minimal and not a harm if careful. 34" tires may experience rub from wheel travel as well so aftermarket wheels would definitely be advised for those or larger tire sizes. Thanks for your inquiry.
Which Fox shocks can I use when I install this leveling kit on my 2017 Sahara jku?
0"-2" inch of lift would be correct for use with the leveling kit. Thanks for your inquiry.
Have this spacer lift installed and time to replace shocks. Will the Bilstein B5100 shocks made for 1.5-3" lift change the ride feeling? Do like the stock shock ride it's had.
It would add some firmer more responsive feel that could be a little more impact than you would have with a stock shock application. Bilstein will be a great candidate for Jeeps spending a good bit of time in both on and off-road conditions and that has added weight from bumpers, winches, racks and other accessories. Thanks for your inquiry.
Will this leaving kit work with air lift bags? This uses stock springs but air lift says they won't work with a lift.
No, it will not. Air lift systems use an air bag cradle, design different from regular spring isolators. Sorry. Thanks for your inquiry.
I have 2.5 inch lift kit currently. Want to raise it a little bit more. Will this work for me?
No. The leveling kit is designed to be used with stock coil springs. Thanks for your inquiry.
I’d like to use this kit along with the Quadratec Rubicon Extreme Wheel (17x9 with 4.75 BS) on my 14 Sahara 4 Dr. Will there be any fitment issues with this combo?
No, that will be a nice look and should be free of any rubbing. Thanks for your inquiry.
Will these cause wheels with stock back spacing to rub?
Only, if you are running them along with a tire too wide for the factory backspace and offset. 33" will rub fun turn on a factory wheel.
Install went well. Just curious about the front brake lines. Bracket is deleted per the directions. Do you have to secure them with a new bracket? Reroute? Or just let them hang without doing anything special? Nothing is mentioned in the directions or video.
You will no longer need the front brake line bracket.
Can I use with 33 inch tires
This kit is designed to be used with tire diameters up to 33". Thank you for your question.