Chat with us, powered by LiveChat Reviews for Smittybilt XRC Atlas Front Bumper with Q9500is Self Recovery Winch & Dyneema Synthetic Rope for 07-18 Jeep Wrangler JK | Quadratec Skip to main content
Home » Jeep Bumpers » Front Bumpers » Front Full Width Bumpers » Smittybilt XRC Atlas Front Bumper with Q9500is Self Recovery Winch & Dyneema Synthetic Rope

Reviews for Smittybilt XRC Atlas Front Bumper with Q9500is Self Recovery Winch & Dyneema Synthetic Rope for 07-18 Jeep Wrangler JK

< Back to the product
Bill J.
4/3/2017
5

Looks good, Took a little longer than suggested to install
FRANCIS M.
11/19/2016
5

Went on easy and took about 2 hours to remove factory jeep bumper and install bumper/winch combo. Really looks great and built great, thanks Quadretec for getting quality items on your website.
Drew T.
12/20/2017
4

Bumper fit great but the winch that came with the bumper as a kit does not fit on the bumper without either filing down one of the bumper mounting bolts or cutting off your vacuum pump mount. I wouldn't mind cutting the vacuum pump mount but they did not provide anything in the kit to re-mount the pump so you would have to build something yourself.
Angela M.
7/3/2017
4

Looks cool, but instructions highly are outdated. Compatible with Jeeps up to 2017, but instructions are from 2013 (4 years out of date). Hardware in the instructions say they are in individual packs, but in reality they are all in one big bag. They are also listed in US measurements, but in fact are metric. Took a lot longer to put together since we had to figure out what bolt went with what section. You also don't know if you have to cut off the frame tabs until the bumper is fully assemble. Plan on buying or splicing the wiring for fog lights. They will not reach and there is no mention of that in instructions.