Chat with us, powered by LiveChat | Quadratec Skip to main content
Home » Jeep Lift Kits & Suspension » Lift Kits » Spring Lift Kits » Mopar 2" Lift Kit
« Back to product
Will 315/70-17 tires fit with stock backspacing 2022 Sport S 3.0 unlimited.
Yes, it will. Thanks for your inquiry.
I have a 2021 4 door Willys and i'm planning on the 2" part number 16170-1033 and I want to go with the Method 305 17X8.5 with 0mm offset 4.75 Backspace with 315/70R/17's will this work without any issues with rubbing.
Yes, that should be compatible and with a trouble free performance. Thanks for your inquiry.
Hi! Will it fit wrangler 4xe?
No, it will not. Sorry for the inconvenience.
Hello, with the MOPAR 2” lift kit, would you recommend replacing all of the control arms, or are these not required. This will be fitted to a European JLUR - in case this makes a difference?! Cheers
Mopar kits include what is required to change for the best geometry along with the taller springs for added ground clearance. An upper control arm change is not necessary with this kit. Thanks for your inquiry.
What size 17x9 rims would work? I have a 2022 diesel and looking to install the Mopar lift Offset and backspacing? Thanks
If only running a 35, a backspace around 5.2 would be a good stance. If you had high top flares and trying to run 37" inch tires a backspace of 4.5" or less would be better suited for avoiding turning radius concerns.
I have a 2018 2 door that i believe is early production so i think its a JK and not a JL...Will the mopar 2 inch lift fit?
If your Jeep uses a traditional keyed ignition or JK era, this kit will not fit. This kit is designed only for JLU models 18 and newer that have push button start and stop. Thanks for your inquiry.
I have a 2018 JL Rubicon Unlimited with stock rubicon rims. Can I run 315/70/17, 35 inch tires without a lift kit. The stock tires from the factory are 285/70/17, 33 inch tires.
The 315/70 17 is wider than what a factory wheel should have mounted, and the backspace of the factory wheel will have a rub issue at full turn. Aftermarket wheels with 5.2" backspace or less and 8-8.5" are highly suggested for running 35's or close to it. Thanks for your inquiry.
Does this kit work on JLU rubicon 4 ports 2.0t?
Yes, the option for 2.0L will fit your Jeep. Thanks for inquiry.
I have a 2021 Willys and had this kit installed. I'm seeing a 3.5" gain, is that correct?
That experience seems very common that customers are reporting in excess of 3" of true lift height. Heavier accessorized Jeeps with greater added weight should experience heights closer to the marketed lift height amount. Thanks for your inquiry.
I have a 2021 Jeep Rubicon. What is the additional added lift I will yield from this 2” mopar fox lift. I’ve been told 3 1/2”.
Incorrect. With the Rubicon spring's height over Sport and Sahara's, this kit will only provide approximately 1.25" of lift on Rubicon models. Thanks for your inquiry.