Chat with us, powered by LiveChat | Quadratec Skip to main content
Home » Jeep Wheels » Alloy Wheels » Quadratec Baja Xtreme II Wheel 17x9 with 4.75in Backspace
« Back to product
I'm interested in these wheels for my 2019 JL Sport. I don't intend to put a lift kit on the jeep and I curious if 255/80r17's would work on my setup. I've heard that size will work with factory wheels but they are only 7.5" wide, I believe
Yes, it will fit, just with a wider stance. the backspace variation from your stock wheel will allow full turn and should not encounter a rub with that metric size tire choice. Thanks for your inquiry.
Will these fit a 305/65/R17 and do they come with valve stems?
That size tire will fit. They do not come with valve stems. Thanks for your inquiry.
Just purchased the Quadratec Baja Xtreme II Wheel in Gun Metal Gray, will the center hole accept the Mopar 1LB77MALAC Recon Edition Center Cap in Gray Quadratec Part #: 92702-8109?
Yes, it will. Thanks for your inquiry.
Will the mfr listed tire size (245/65/17) mount on these wheels for my 05 Limited WK?
That is the widest you would want to go with that tire size. The inner sidewall to the suspension and frame is: 2.2" Farther Away. The outer sidewall is: 2.2" Farther Out in this from the 50mm + offset wheel found on WK from that year. You may hang out some. Thanks for your inquiry.
How much further will these stick out on a Gladiator Rubicon with 35x12.50 over the factory setup?
This model with that tire, the outer sidewall edge would sit out 2.34" further from a stock wheel and tire from Gladiator Rubicon. Thanks for your inquiry.
Good morning! On a JT Mojave and mounted with 35x12.5 tires, would I be rubbing at full tilt? As of now, it is stick with no lift but hoping to add the AEV 2” spacer lift in the near future. Thank you!
This backspace should help avoid any rubbing and full turn with 35's. Thanks for your inquiry.
Baja Xtreme II wheel. Will the factory lug nuts from a jeep gladiator work with these wheels. In a question they say they will and in a review they say they won't, please clarify. Thanks
The Lug pocket on a Baja Wheel will accept the factory JL/JT/JK lug nuts. Lug pocket diameter is 35.5mm. JL/JT wheel nut diameter is 30mm. Thanks for your inquiry.
For a 2020 JT Rubicon, how much will this extend past the fenders with a 37x12.5x 17 tire?
The wheel's outer edge will be out 2.95" further than the factory wheel. a 37" X 12.50 could be in the range of 2.5" wider than factory tire. Comparing the width of your vs stock should allow most accurate approximation.
Is the raised center cap metal or plastic, and please confirm that it attaches with hex bolts?
The ABS plastic cap is fastened with button head socket cap screws that are stainless steel – M6 sizing. Thanks for your inquiry
Do these wheels come with lug nuts? If not what black lug nuts should be purchased?
Lug nuts at not included. We do offer black Quadratec brand lug nuts. Part # 92806.9023 or 92806.9008 or 92806.9010 among others, depending on the year/model of your Jeep.