Skip to main content
Home » Jeep Bumpers » Rear Bumpers & Tire Carriers » Tire Carriers » Mopar Oversize Spare Tire Carrier Mounting Bracket Kit
« Back to product
Would this hold a 40 inch tire?
No. It hold a 37" spare tire maximum. Thanks for your inquiry.
does this fit a 2016 jeep wrangler unlimited jk?
No, this will not fit the earlier JK Wranglers
So I just got oof the phone with a customer serive representative and they told me that I can just buy this mounting kit and it will work for now for my 35 inch tire and if I decided down the line that I needed the hinge kit could do that later?
It is not recommended. The hinges and latch are not designed to carry the weight of oversized tires and wheels. You risk damage to the Jeep not using the hinge reinforcement kit.
I have bought this kit already. I was wondering if it works alone for my 35s spare tire or I will have to buy the Mopar 82215356AB Tailgate Reinforcement Kit
You will need the Reinforcement Kit as well.
Should a 35 inch tire sit and slightly rub on bumper with both tailgate reinforcement and spare mount relocation brackets installed? I have minor rubbing and tight face gut on rubicon steel bumper
Mopar states this kit is designed to fit up to 37" tires
Can you tell me exact amount this actually moves the stock carrier up from stock location? Thanks
This move the tire UP 1-1/2"
i have a 2020 jlu that came with the reinforced tailgate hinge do i still need the tire carrier to carry a 35' tire? thanks
Yes, you do.
with 35" tires do I need this product, or just the tailgate reinforcement itself? [If it makes a clearance difference I have Mopar OEM steel bumpers.]
For tires over the factory 33" tires you will need both, to support the weight and to position the tire to clear the bumper.
If I have the Mopar Tailgate Reinforcement System do I still need this in addition to support a 35” tire or will I be ok with the the tailgate reinforcement alone?
For tires over the factory 33" tires you will need both
How do you seat the tire bumpers in the door? Pushing and turning doesn’t seem to work
The bumpers should be pressed and turned clockwise like a standard thread to attach to the door.