AEV 20402035AA Pintler Wheel in Onyx for 18-24 Jeep Wrangler JL

JL Specific Design: When designing the Pintler Wheel for JL Wranglers, AEV covered every detail. They optimized the offset and backspacing for the JL, enlarged the center bore, and redesigned the center cap. The larger center bore allows the spare to easily fit over the JL’s factory backup camera.

Safety Tested: AEV tests all of their wheels under SAE J2530 requirements. The wheels are tested on radial fatigue, cornering load, and curb impact.

Wheel Clearance: The Pintler Wheel’s barrel shape and high offset allows it to clear the Jeep Wrangler JL’s brakes. However, there is not enough room for .5oz and 1oz stick-on wheel weights, so standard .25oz wheel weights must be used.

Pintler Wheel Specs:

Wheel Size: 17x8.5

Backspacing: 5.77”

Offset: +25mm

Center Cap Bore Diameter: 71.5mm

Load Rating: 2400lbs

Wheel Material: A356 T6 Cast Aluminum

Installation Notes

Installation Difficulty:

Level 4Experts Only

Lug Nuts not included, order separately. We recommend that wheels be installed by a certified installation center. Note: Wheels are not returnable after tires have been mounted.

Installation Time: Less than an hour

Parts Included

• 1 Alloy Wheel
• 1 Center Cap

Warranty

Limited Lifetime Structural Warranty