Alpine KTA-200M Mono Power Pack Amplifier with SBV-10-WRA 10in Water Resistant Subwoofer for 07-18 Jeep Wrangler Unlimited JK
Big things come in small packages, and this point is proven with the Alpine KTA-200M Mono Power Pack Amplifier. This compact subwoofer amplifier features Alpine’s exclusive dynamic peak power (DPP) technology. DPP allows the KTA-200M to have 400-watt peak power while only measuring 7” x 3.5” x 1.25”. Because of its compact design, the KTA-200M can be mounted to the back of the Alpine iLX-W650 or i407-WRA. Alpine includes a plug and play harness and their PowerStack bracket specifically for this use.
Jeeps are not known for their factory stereo performance, and it can be hard to hear your tunes when driving with the top down. Take back the power with an Alpine 10" Water Resistant Subwoofer. This easy to install upgrade conveniently mounts under the passenger seat and out of the way. It is designed for use with the Alpine MRV-M500 Mono V-Power Digital Amplifier (sold separately). Unlike other aftermarket subwoofers, this Alpine unit is waterproof (IP66 rating), so you do not need to worry about damaging it in a rain storm or on the trail. Alpine backs this sub with a 1 Year Limited Warranty.
Installation Note: The Alpine 10" Water Resistant Subwoofer is designed for use with factory carpet. If your Jeep does not have carpets, additional padding may be required.
Not Compatible with 2-Door Wranglers
Not Compatible with Factory Premium Sound System
Dynamic Peak Power (DPP): Alpine’s exclusive DPP technology allows the KTA-200M to have double the power in an exceptionally small package. DPP automatically adjusts gain instantly to fit your music. It prevents the music signals from being clipped, and provides up to double the power to support the rhythm section. This means snare, high-hat, trumpet, and similar instruments will remain crisp and clear.
PowerStack Compatibility: Because of its small size, the KTA-200M can be attached to the back of an Alpine iLX-W650 or i407-WRA (sold separately) using the included PowerStack bracket. This exclusive PowerStack design is a plug-and-play solution that provides amazing sound quality without taking up too much room. The KTA-200M is also compatible with the Alpine RUX-KNOB.2 Remote Bass Knob (sold separately).
Alpine KTA-200M Mono Power Pack Amplifier Specs:
Product Dimensions: 7” x 3.5” x 1.25” (178mm x 89mm x 32mm)
Dynamic Peak Power (DPP @ 4Ω): 400 Watts x 1 (14.4V, ≤1% THD+N)
Root Mean Square (RMS @ 4Ω): 200W x 1 (14.4V, ≤1% THD+N)
Root Mean Square (RMS @ 2Ω): 200W x 1 (14.4V, ≤1% THD+N)
Signal to Noise Ratio (S/N): >80dB (@ 10w into 4 Ω)
Total Harmonic Distortion Plus Noise (THD+N): ≤0.1% (@ 10w into 4Ω)
Alpine SBV-10-WRA 10in Water Resistant Subwoofer:
Speaker Size: 10 inch
Location: Under passenger seat
Recommended Amplifier Size: For use with 500 Watt amps
Vehicle Specific: For use with 4 door Wrangler JKs only
Rated Waterproof: IP66 Rating
Peak Power: 1050 Watts
Root Mean Square (RMS): 350 Watts
Nominal Impedance: 2 Ohm
Frequency Response: 45-200Hz
Wiring Pigtail: OEM-grade Molex 2-pin connector
- Size: 10"
- Location: Front Seat
- Shipping Weight: 25
- Shipping Dimensions: 20in x 19in x 15in (L x W x H)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
