Quadratec Part #:
56118-0051
Crown Automotive Part #:
52060049K
Description
When it is time to tighten up the steering on your JK Wrangler, you can trust Crown Automotive to get you back on the road. This Drank Link Assembly for left hand drive vehicles is a complete kit with both tie rod ends and adjuster so you can properly align your front axle. Built to factory specifications, it is a direct replacement, no need to modify or drill.
Popular Similar Items
Details
- Features: Steel
- Shipping Weight: 13lb
- Shipping Dimensions: 45in x 5in x 4in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Drag Link Assembly Reviews
Paul G.
7/13/2022
Great replacement for worn out old one.
Evan D.
5/26/2022
Another component that solved my death wobble. My joint at the end of loose and almost broke. This went in easy and immediately solved the problem. Just make sure to get a good alignment once finished and buttoned up.
Tim P.
5/29/2021
Good replacement. A lot cheaper then oem.
Questions
Amy R.
Will this drag link work on my 2009 JK that has a lift and I have 35’ tires on it
This is a direct replacement for your original and it will work, though when running 35's and larger tires with a lift there are advantages to upgrading steering linkage components like your drag link when poor steering characteristics maybe noticed or you expect to aggressively off-road your Jeep. Thanks for your inquiry.
Geri M.
Will this work with a 4” lift?
Yes this will be fine with a 4" lift in terms of fitment. If you go ahead and add the larger tires that the new lift will allow then you may see some issues as the size and weight could be too much stress for the original equipment. You may need an aftermarket heavy duty drag link.
Monica D.
I want to make sure this is the correct drag link that goes on the passenger side?
Yes this attaches at the passenger side steering knuckle and connects up to the pitman arm at the steering box