Crown Automotive RT34001 Stainless Steel Rear Bumperette for 76-95 Jeep CJ and Wrangler YJ
Quadratec Part #:
12008-1021
Crown Automotive Part #:
RT34001
Description
Got a banged up rear corner? Crown Automotive offers this Stainless Steel Rear Bumperette for the CJ and Wrangler YJ. This bumperette is made from polished 304 stainless and can be used as a replacement when you only need 1. Includes new stainless hardware so you do not have to salvage old threads. Can be used on left or right rear corner.
Popular Similar Items
Details
- Features: Stainless Steel
- Color: Polished
- Shipping Weight: 6lb
- Shipping Dimensions: 12in x 10in x 6in (L x W x H)
Jeep CJ-5
- 1983 Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
- 1978 Jeep CJ-5
- 1977 Jeep CJ-5
- 1976 Jeep CJ-5
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
- 1976 Jeep CJ-7
Jeep CJ-8
- 1985 Jeep CJ-8
- 1984 Jeep CJ-8
- 1983 Jeep CJ-8
- 1982 Jeep CJ-8
- 1981 Jeep CJ-8
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Stainless Steel Rear Bumperette Reviews
Rock L.
2/2/2022
These are great quality and look great. Had to bend them a bit to fit the holes on a re turned back bumper but it was no problem!
Deanna L.
7/3/2021
Received this item.
Questions
David S.
I have placed this on my 83 CJ7 and the holes do not match up from side to side on the factory bumper. The bumperettes holes are much farther apart than the mounting holes on my CJ.
Do you have to push or bend in the bumperettes to get the holes to match up??
They are about 3 inches or so farther out than the holes on my factory bumper.
Thank you,
Yes, forming will most likely be needed for the proper fit. The steel should not have to be bent so much that damage occurs though.