Design: OEM quality and design.
Visibility: Increase your visibility with a cleaner and whiter light than halogen.
Lifespan: 50,000 hours above
Looking to replace and upgrade your factory halogen headlights on your Jeep Wrangler JL or Gladiator JT? Look no further than these DV8 Offroad LED Headlights. These are OEM quality, but provide better visibility and safety than halogen lamps.
Specs
- Power: 90W/pair
- Color Temperature: 6000K
- Input Voltage: DC 12-30V
- IP Rating: IP67
- Life span: 50,000 hours above
- Features: LED
- Shipping Weight: 14lb
- Shipping Dimensions: 24in x 12in x 12in (L x W x H)
Jeep Gladiator (JT)
- 2026 Jeep Gladiator (JT)
- 2025 Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions

However, for a 2023 Jeep Wrangler JL switching from factory halogens to LEDs, reprogramming (flashing) the Jeep's computer is required. If you do not update the body control module (BCM) configuration to indicate that LEDs are installed, you may experience issues such as flickering, bulb-out warning messages, or improper high/low beam operation due to the lower electrical draw of LEDs compared to standard halogen bulbs. This can be done using a dealership scan tool or an aftermarket programmer like a SuperChip or Tazer.

Because these headlights feature a built-in anti-flicker canbus system designed specifically for the JL wiring architecture, no software reprogramming or Tazer configuration is required to prevent flickering or error codes.
To verify success after installation, simply turn on your headlights and high beams to confirm steady, flicker-free illumination with no dashboard warning lights.

























