Kentrol 80715 Mechanical Hood Catch Kit for 18-24 Jeep Wrangler JL & Gladiator JT
Heavy Duty Design: Instead of using rubber and plastic like the factory hood latches, Kentrol manufactures their Mechanical Hood Catch Kit from steel.
User Friendly: No cutting, drilling, or other modifications are required to install this kit. It is 100% bolt-on, and compatible with both standard and high-top fender flares.
Corrosion Resistant: Kentrol uses black powder coated 304 stainless steel, as well as stainless steel hardware for their Mechanical Hood Catch Kit.
- Features: Stainless Steel
- Color: Textured Black
- Shipping Weight: 2.9lb
- Shipping Dimensions: 7in x 7in x 3in (L x W x H)
Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Kentrol Mechanical Hood Catch Kit Reviews
Put these on my Jeep last week, took a little time adjusting but once i got it dialed in they work like a charm.
Sometimes aftermarket isn't better than OEM..
I didn't care for these. It feels like the bolt needs to be just a little longer as you can only get about 5 rotations in or it's too tight and if I loosened the bolt enough to where I would like it to be I don't feel there's enough thread engaged. I don't like the design it takes too much pressure to lock the catch even with just a few threads in. I wasn't going to use locktite like the instructions suggested but after seeing how few threads are engaged I changed my mind. I may try a longer bolt to see if they are a little more usable. If i didn't have a hood lock I would be putting the stock latches back on. I still might.. I don't recommend these.
