Lynx Front Adjustable Track Bar for 07-18 Jeep Wrangler JK
Fully Adjustable: With adjustments on both ends of the track bar, this will allow you to precisely center your Jeep's axles for optimal ride quality.
Heavy-Duty Construction: Install with confidence knowing the Lynx front track bar is made from 1.25” x .281 DOM Tubing with 1026 carbon steel for superior strength.
Vehicle Specific Design: Lynx engineered this Front Adjustable Track Bar for use with JK Wranglers.
- Features: Adjustable
- Shipping Weight: 14lb
- Shipping Dimensions: 46in x 10in x 8in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Lynx Front Adjustable Track Bar Reviews
Steering was starting to get a little loose over bumps and decided to replace the track bar along with the drag link. I think the real culprit was the drag link, but the front wheel-to-frame measurements were 1/2" different after my 2.5" AEV lift so this recentered it nicely. Only downside is that the big jam nut is not accessible when the bar end is in the bracket so I had to tighten it before dropping it in which was finicky. I'd like to see how anybody torques it to 140 ft-lb with a crescent wrench!
Quality for a decent cost
Strong and good price
