MBRP S5502AL Installer Series Cat Back Exhaust System in Aluminized Steel for 07-11 Jeep Wrangler Unlimited JK 4 Door with 3.8L V6 Engine

Installed with no issues, installation was very quick, perfect fit - pay attention to the torque settings on the clamps. No leaks, sounds great. Minor gripe - would be nice if new rubber hangers were included but at the price point that is a moot issue. Planning to install one of these systems on my other Wrangler.

Ordered mine with the impression that it was going to be black however it was not. I had already taken the old exhaust off and needed to put this one one so I didn't have time to call for an exchange so I kept it as is. I had a little bit of trouble installing it tight enough and couldn't seem to stop the air leakage at the mounting/connecting points. I will continue to mess around with it and hope that I can get it to fit a little better and go from there. You get what you pay for here and if you are hoping for a solid fitting performance exhaust this probably isn't it.

Although the pre bent tubing was well done, the muffler and hangers were a great fit, the clamps left alot to be desired. They are designed similarly to the OEM MoPar clamps BUT they do not clamp tight enough to retain the pipe. They are just a bit too large in diameter. We broke a bolt on one after it bottomed out on the threads and would not get any tighter. Had to get four quality strap style stainless steel clamps from the parts house to finish the install. I expected better from MBRP.
If you order this, be advised about the clamps.