Mopar 77072397AH 2" Lift Kit with Bilstein Reservoir Shocks for 18-26 Jeep Wrangler JL 2-Door with 2.0L
Built to Endure: This lift is engineered to give you a comparable ride to your original suspension with all the necessary components.
Simple Install: Mopar has designed this lift to install quickly with a direct fitment to your Jeep. No driveshaft or brake line modifications are required!
Quality Design: Offering the factory Mopar quality you expect and keeps your Jeep looking original.
Note: Kits with Bilstein shocks will work up to 2026 JL 2-Door.
Many states have laws that limit the maximum height of a lifted vehicle. Never exceed the legal height limit.
- Features: Short Arm
- Shocks Included: With Shocks
- Lift Height Range: 0 - 2.5 inch
- Included Parts: Bump Stop Extensions, Coil Springs, Front Lower Control Arms, Hardware, Sway Bar Endlinks
Jeep Wrangler 2-Door (JL)
- 2026 Jeep Wrangler 2-Door (JL)
- 2025 Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Mopar 2" Lift Kit Options
| Part Number | Catalog # | Engine Options | Shock Options | Price | |||||
|---|---|---|---|---|---|---|---|---|---|
| 77072397AI | 16170-1130 | 2.0L | Bilstein Reservoir | $1,795.50 | |||||
| 77072396AI | 16170-1131 | 3.6L | Bilstein Reservoir | $1,795.50 | |||||
| 77072397AF | 16170-1030 | 2.0L | Fox Shocks | $899.99 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Mopar 2" Lift Kit Reviews
Which was just perfect, the fit, everything is impeccable, and on top of that it's comfortable, much less stiff than the AEV 2.5 for example.
Installed on a 2025 wrangler that has Autolynx disconnects in the front. Holy cow! The ride difference is night and day, no more shock fade, and I don’t need to slow down nearly as much in the trails now. Ride feels very similar to stock on road and a billion times better off road. 2” is a lot of lift and I now have to hop into the jeep as I’m vertically challenged. Install wasn’t too bad and paper instructions were included.
Fit and finish was perfect. Instructions were clear. I was expecting a 2 inch lift, but this is closer to 3.5 inches.
Questions
For a 4-door 4xe model, you must use a dedicated plug-in hybrid lift kit, such as Mopar part number 77072522AE (or its matching official 4xe variant like the Jeep Lift Suspension Kit 77072522AE, which is specially engineered to handle the unique axle weights and weight distribution of the 4xe drivetrain.
The confusion regarding the 2024+ compatibility comes down to a minor hardware change Jeep made to the front sway bar link mounting bolts:
2018–2023 models use a 12mm bolt for the sway bar links.
2024–2026 models were upgraded to a larger 14mm bolt.
Which Mopar Kit to Buy:
If you choose the Bilstein Shock Kit: This is the newer version designed by Mopar to accommodate all JL years. It will work perfectly. The Mopar Bilstein kits are packaged with both 12mm and 14mm sway bar link hardware, making them a direct bolt-on for your 2025 Sport 2-Door.
If you choose the FOX Shock Kit: This version was originally packaged for 2018–2023 models and only includes 12mm hardware. You can still run it, but you will have to either drill out the sleeve on the included sway bar links to fit your factory 14mm bolts, or purchase separate 2024+ aftermarket extended sway bar links.
Pro-Tip for Your Base Sport: Since you have a 2-Door Sport (which is lighter than a 4-Door or a Rubicon), you will likely net closer to 2.5" to 3" of actual lift out of this kit once installed, as Mopar rates the 2" height increase based on fully loaded, heavier vehicles.
