Here are some similar items you might be interested in
Description
Poison Spyder BFH™ II Rear Bumpers are designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally " Built For the Hammers" with the best ground clearance and departure angle possible. It is no wider than the Jeep JK Wrangler's rear body tub, with angled facets to improve its ability to slide over the rocks while still protecting the corner of the tub from drop-offs and ledges. Ships in bare steel.
Details
The BFH™ II Rear Bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH™ II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used.
The faceted plate steel design of the JK BFH™ II Rear Bumper provides the most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the stock rear crossmember. At the installer's discretion, the stock rear crossmember may be plated across the open cut (materials to do this are not included), or the crossmember removed completely.
The faceted plate steel design of the JK BFH™ II Rear Bumper provides the most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the stock rear crossmember. At the installer's discretion, the stock rear crossmember may be plated across the open cut (materials to do this are not included), or the crossmember removed completely.
Installation Notes
Installation Difficulty:
Level 3Advanced1. Cutting required.
Installation Time: 2-3 hours
Parts Included
- Rear Bumper
- Hardware
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)