Skip to main content
Home » Jeep Bumpers » Rear Bumpers & Tire Carriers » Rear Bumpers » Quadratec Brute Strength Aluminum Rear Bumper

Quadratec Brute Strength Aluminum Rear Bumper for 18-24 Jeep Wrangler JL

Quadratec Part #: 12057-0262
Description

Lightweight HD Aluminum Design: This premium rear bumper offers a lightweight heavy duty solution to protect the rear end of your Jeep. Weighing in at mere 50 pounds and built for strength. The lighter weight compared to most aftermarket steel bumpers will keep your fuel mileage in check while the 6mm thick aluminum plate provides the necessary strength. While the steel mounting brackets provide a superior substructure to tie the bumper into the frame. This bumper offers a aggressive style with performance you can count on.

Recovery Ready: The supplied d-ring mounts are made from 3/4" thick steel and have integrated tow strap hooks on top. The integrated holes accept 3/4" D-Rings using a 7/8" pin size giving your Jeep a bold aggressive look with multiple recovery points for all your trail riding adventures. The face of the bumper offers two stout Hi-Lift jack points for safe and simple jacking. These holes also help prevent the jack from sliding off for a safer user friendly solution. For superior strength the Hi-Lift jack will lift up on the steel plate mounted behind the aluminum bumper fascia. D-Rings are sold separately.

Large Spare Tire Opening w/ Non-Slip Step: This large opening will allow for use with larger spare tires. Measuring 25" at the top and descending 4" to a width of 18.5" at the bottom. We also incorporated a dimpled landing pad 18" x 5" to be used as a step allowing you to load up a roof rack with ease once the spare tire is hinged open. Giving you ample space for both feet with grip.

Hitch Compatible: Notched in the bottom center for a perfect fit with the factory hitch. We also include a spacer kit to lower down the existing hitch plug for seamless operation and easy access. Allowing you to maintain your factory tow rating.

Included License Plate Mount: The included all aluminum license plate mount installs on the driver side to existing holes on the bumper. The bolt on design also allows you the ability to use other license plate mounting options if preferred. Please note that the license plate light is sold separately.

Simple No Drill Installation: This bumper is a direct bolt on installation that does not require any drilling or modification. This easy installation is for the do it yourself installer that can be done with basic hand tools.

Details

Compliment your awesome Quadratec Aluminum Font bumper with the Quadratec Aluminum Brute Strength Rear Bumper. Providing ultimate full width protection for the rear of your Jeep Wrangler JL with style. This premium bumper has a fully welded one piece outer construction using 6mm thick lightweight aluminum plate. This aggressively styled bumper bolts directly to the vehicle’s existing mounting points without any modification or drilling.

Quadratec's aluminum design offers a significant weight savings over comparable all steel bumpers. Keeping the weight down on your Wrangler was the reason why Jeep went with aluminum parts for the body. Lighter weight means less change in gas mileage and without the heavy weight of a steel bumper you won't have to worry about the rear end dipping down over time.

Our Aluminum Brute Strength Rear Bumper is finished with an attractive and durable light textured black powder coating. The full width design measures 73" wide and features tapered ends for additional ground clearance. While the welded steel recovery plates feature tow hooks and D-Ring mounts for use with 3/4” D-Rings with 7/8” pins. This ultimate bumper offers a quality you expect with a passion for the Jeep lifestyle allowing you to Overland with confidence.

Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate
This bumper is Not designed to work with backup sensors.
Installation Time: 1-2 hours
Parts Included
  • Rear Bumper
  • Tow Hook Pair w/ D-Ring Mounts
  • License Plate Mount
  • Installation Hardware
Warranty
Three Year Limited Warranty
  • Features: D-Ring Shackle Brackets, License Plate Mount
  • Color: Black
  • Style: Rear Bumper
  • Material: Aluminum
  • Shipping Weight: 65lb
  • Shipping Dimensions: 77in x 19in x 18in (L x W x H)
  • Jeep Wrangler 2-Door (JL)

  • 2024 Jeep Wrangler 2-Door (JL)
  • 2023 Jeep Wrangler 2-Door (JL)
  • 2022 Jeep Wrangler 2-Door (JL)
  • 2021 Jeep Wrangler 2-Door (JL)
  • 2020 Jeep Wrangler 2-Door (JL)
  • 2019 Jeep Wrangler 2-Door (JL)
  • 2018 Jeep Wrangler 2-Door (JL)
  • Jeep Wrangler Unlimited 4-Door (JL)

  • 2024 Jeep Wrangler Unlimited 4-Door (JL)
  • 2023 Jeep Wrangler Unlimited 4-Door (JL)
  • 2022 Jeep Wrangler Unlimited 4-Door (JL)
  • 2021 Jeep Wrangler Unlimited 4-Door (JL)
  • 2020 Jeep Wrangler Unlimited 4-Door (JL)
  • 2019 Jeep Wrangler Unlimited 4-Door (JL)
  • 2018 Jeep Wrangler Unlimited 4-Door (JL)
Share Your Thoughts
Review Summary
4.1875
Based on 16 reviews
Shared Media
Questions

Customer Submitted Photos

Share Another Photo

Quadratec Brute Strength Aluminum Rear Bumper Reviews

Questions