The Quadratec Grab Handles simply install to the roll bar on your Jeep Wrangler JL and Gladiator JT. These stout handles provide the assistance needed for you and your passengers to enter your Jeep with ease especially with a lifted vehicle.
Made from a durable nylon with firm rubber handles and solid steel mounting brackets. These rubber handles feature contoured groves for your fingers to firmly grip without slipping. While the steel mounting brackets are coated with rubber to protect the paint finish on your roll bar. Our ultimate grab bar handles securely bolt to the roll bar with existing screws for long lasting performance. Sold as a front pair or front and rear set.
Fitment Note: Rear set will Not fit the Gladiator JT with soft top installed or the Wrangler JL with Power Sky Top.
Essential JL & JT Accessory: These practical grab handles will come in handy every time you enter and exit your Jeep. Great for everything from a stock Jeep up to any amount of lift and larger tires. Assistance you and your passengers with both appreciate. A 2-Door Jeep wrangler JL will only need a front pair while passengers in the 4-Door Jeep Wrangler JL and Gladiator JT will benefit from the front and rear package.
Simple Installation: This custom engineered accessory is specifically designed for your Jeep Wrangler JL and Gladiator JT and essential for Jeep life. Can be installed in minutes with a T25 torx by simply backing out the factory roll bar padding mounting screws and installing the grab handles re-using the original screws.
- Front Grab Handle Pair
- Rear Grab Handle Pair (option)
- Features: Front, Nylon, Rear or Front, Nylon
- Color: Black
Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Quadratec Grab Handles Options
|Part Number||Catalog #||Mounting Location:||Price|
|14018 1032||14018.1032||Front & Rear Pairs||$69.98|
|14018 1030||14018.1030||Front Pair||$34.99|
Customer Submitted Photos
Quadratec Grab Handles Reviews
I bought these because I figured the metal brackets would be better than the Mopar one's plastic ones. I now realize why Mopar used plastic.
I just uninstalled mine to try something else and discovered that the thin rubberized coating over the metal tabs easily strips away, even the passenger side which never saw any use had quite a bit of bare sharp metal exposed. This, as you could expect, cut into the plastic roll cage covers. There's noticeable damage to the driver side (which saw use, obviously) around the torx bolts.
TL;DR: Clamp coating comes off the moment you install them and the exposed bare metal damages the area around it.
Well made, no branding. Looks stock. Nice to have overhead handles. The directions are a little vague on the orientation at first but ok. Needs T25 torx. Only 1 set out of the numerous torx sets I had, had a T25. If you have a hard top you may need to remove/prop the front panels to fit the socket in. Good product. I recommend