Quadratec STEALTH 7" Round Auxiliary Light with Dual Function Amber/White DRL - Two Lights with Wiring Harness
Impressive Illumination: Utilizes 38 Osram LEDs to produce a night-busting 4,062 lumens of light, while choice of white or amber DRL backlighting increased daytime safety.
Combination Pattern: Designed with spot and flood beam pattern for excellent front visibility in all directions.
Weather Busting Performance: IP67 weatherproof rating ensures water and dust are locked out.
Durable Equipment: Aluminum housing construction includes stainless steel mounting bracket and hardware.
Quadratec's Stealth 7" Round Auxiliary Light with Dual Function Amber/White DRL provides exceptional night-busting light thanks to 38 Osram LEDs that produce 4,062 lumens of light. Designed with a dark tinted reflector which adds to the Stealth look of this large 7” driving light. Dual position DRL light lets you select amber or white, while its combination beam pattern spreads light evenly and effectively for unmatched forward visibility. Tested to an IP67 waterproof rating, while the housing's aluminum construction provides maximum visibility. Includes one 7" LED light and features stainless steel mounting bracket and installation hardware.
Specifications:
- Raw effective power 108 Watts
- Power: 108 Watts
- 4,602 Raw Lumens
- Current Draw: 6A @ 12V or 3A @ 24V
- Color Tempature: 5700K
- IP67 Waterproof Rating
- Aluminum Diecast Construction with Stainless Steel Mounting Bracket and Hardware.
- Bezel-less & Screw-less unique design
- Light Pattern: Combo
- Lighting Type: Round
Quadratec STEALTH 7" Round Auxiliary Light with Dual Function Amber/White DRL Options
| Part Number | Catalog # | Quanity | Wiring Harness Options | Price | |||||
|---|---|---|---|---|---|---|---|---|---|
| 97109 1084 | 97109-1084 | 1 Qty. | without Wiring Harness | $199.99 | |||||
| 97109-1085 | 2 Qty. | without Wiring Harness | $399.98 | ||||||
| 97109-1086 | 1 Qty. | with Wiring Harness | $229.98 | ||||||
| 97109-1087 | 2 Qty. | with Wiring Harness | $433.22 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Quadratec STEALTH 7" Round Auxiliary Light with Dual Function Amber/White DRL Reviews
These throw off some light! Nice spread, and appear well made.
These lights look great in person, even better than the website photos
Thanks for this quality product
I’m beyond thrilled about these lights. I got six of them to mount up on a crossbar over my windshield to make a custom light bar, and it turned out even better than I envisioned.
The lights themselves are very well made, with a stout housing, strong lens and appropriately sized mounting hardware. Many lights come with brackets that don’t seem like they’ll hold up to off-road abuse, but these are rock solid. One of the things I really like about them is that you have two screws on each side of the light to adjust the angle, which means that once you tighten it up, it’s not going anywhere.
The DRL function of the lights is something that also sets these lights apart. The DRL part is subtle. It’s bright enough to be very visible at night, but not so bright that you’ll annoy or blind people. During the day it’s just bright enough to be noticeable.
The actual light part is very, very bright. These lights turn night into day when they’re all on. Honestly, they make the rest of my lights unnecessary (headlights and high beams included), but then again, who doesn’t like having some extra lights?
Questions
To connect the Quadratec STEALTH 7" Round Auxiliary Lights directly to your factory Aux switches, follow this direct wiring path:
1. Identify the Wires on the Light Pigtails
Each Stealth light housing has a pigtail with three or four wires (depending on the specific production generation, but typically formatted as follows):
Black Wire: Ground (-)
Red Wire: Main High-Power Auxiliary Light (+)
Yellow/Blue/Green Wire: Amber DRL (Halo) (+)
White/Other Wire: White DRL (Halo) (+)
2. The Direct Bypass Wiring Steps
Instead of routing wires through the firewall to an aftermarket switch, you will run the pigtail wires directly to the Jeep's factory accessory wires located in the engine bay (on the passenger side, tucked next to the battery/fender).
Run the Ground: Combine the Black (Ground) wires from both lights and connect them directly to a factory grounding terminal on the inner passenger fender or frame rail.
Wire the Main Beam: Combine the Red (Main Power) wires from both lights. Connect this combined wire to your chosen high-amperage factory Aux switch wire under the hood:
Aux 1 (Orange/Pink) — 40 Amp
Aux 2 (Dark Blue/Pink) — 40 Amp
Wire the DRL (Halo) Functions: You have two ways to power the dual-function DRLs:
Option A (Manual Control): Combine the DRL wire of your choice (e.g., Yellow for Amber, or White for White) from both lights and connect them to one of your lower-amperage factory Aux switches under the hood:
Aux 3 (Orange/Yellow) — 15 Amp
Aux 4 (Dark Blue/Back) — 15 Amp
Option B (Automatic with Ignition): If you want the DRL halos to turn on automatically whenever the engine is running (without wasting an Aux switch button), tap them into an ignition-hot source. You can tap into the factory fender DRL wiring, or use a fuse-tap on an ignition-switched fuse in the main engine-bay fuse box (such as F52 - Cigar Lighter).
Note: Make sure to heat-shrink and seal all solder or crimp connections under the hood to protect them from moisture and dirt.