The Quadratec Tow Hitch Wiring Harness will allow you to easily connect trailer tow lights to your Jeep Wrangler JL. The plug-n-play harness connects to the factory tail lights and has a 4-way output plug to make sure your tail lights, turn signals and brake lights function properly on your trailer.
Our 4 Prong harness is made for a plug-n-play installation and keeps you from having to make frustrating modifications to your vehicles wiring. The harness will clip onto the Quadratec tow hitch for easy access. A clean installation that keeps your haul safe and visible.
Consult your owners manual for maximum vehicle towing capacity and recommended towing procedures.
Quadratec Engineered for Quality Performance: The Quadratec Tow Hitch Wiring Harness offers the quality you expect and keeps the installation looking original. The entire harness is protected with wire loom tubing and we even include pre-installed factory style push in wire ties along the rear of the harness. Proving a clean installation that looks as if it were installed from the factory.
Quick & Easy Installation: This custom wiring harness is specifically designed for your Jeep Wrangler JL and provides a plug-n-play installation. Allowing for a simple installation that can be done in less than an hour. Fitting both 4-Door and 2-Door models.
- Shipping Weight: 3lb
- Shipping Dimensions: 16in x 11in x 3in (L x W x H)
Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Note: Also fits Wrangler 4xe, Rubicon 392 or Diesel equipped models
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Quadratec Tow Hitch Wiring Harness Reviews
Good quality, fits good and easy to install
No issues with the product, but the instructions say that you should route it over the suspensions cross member and follow the wiring loom up to the engine bay. If your JL is like mine, your wiring harness crosses over to the passenger side at the rear suspension cross member, which will get you to the engine bay with nowhere to fish up the remaining wiring. Upon rereading the instructions, you are supposed to end up on the driver side and fish up the wire by the brake booster, which is not where the wiring loom comes up to the front. There is a wrapped tube section for the brake lines, which is what they want you to follow up the frame rail. Hopefully this saves somebody some headache when they are installing.
Easy installation