Skip to main content
Home » Jeep Bumpers » Front Bumpers » Front Full Width Bumpers » Smittybilt XRC Front & Rear Bumper with Q9000 Self Recovery Winch
Smittybilt XRC Front & Rear Bumper with Q9000 Self Recovery Winch is no longer available
Here are some similar items you might be interested in

Smittybilt XRC Front & Rear Bumper with Q9000 Self Recovery Winch for 87-06 Jeep Wrangler YJ & TJ

Description
The new XRC Bumper line was engineered to provide increased clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance. Each bumper is manufactured from 3/16" cold rolled steel and then robotically welded to the exact specifications. All the welds are ground down and smoothed out and then a two stage powder coat is applied for the ultimate look. The textured matte powder coat finish offers a truly custom look! The front stinger is manufactured from 1.75 tubing and has two light tabs that can accommodate up to two 9" lights. Your winching needs are also met as each bumper comes with an integrated winch plate. The Smittybilt XRC Rear Bumper is manufactured out of 3/16" cold rolled steel and comes standard with a built in class IV receiver hitch and two solid D-Ring mounts that are welded on the inside and out for maximum strength. The optional swing away portion features a billet handle with a camlock system, adjustable tire mount and safety catch that will hold the Swing Away open while parked or positioned at an angle. The optional Swing Away Tire Carrier can be added to the bumper at anytime.
Details
Introducing the first winch designed and engineered specifically for your Jeep®. All Quadratec Winches are manufactured in our state of the art ISO 9001 factory and are CE certified for our international customers. The Q9000 provides all of the capability that most enthusiasts will ever need for occasional use on their Wranglers and CJs. Now you can take advantage of Quadratec's massive purchasing power to get the lowest price of any winch in this class. Our engineers work directly with the factory to provide solutions which are specifically tailored to your Jeep®. Our powerful 4.8hp series wound motor and class leading low gear ratios give fast line speed with a Battery Friendly low current draw. You will get the most winching time from your available state of battery charge. We give you an industry best Limited Lifetime Warranty on mechanical parts and a 1 year Warranty on all electrical components. Detailed installation instructions and a handy glove compartment sized Owners Manual with Winching Guide are included.
All Q Series Winches include two sets of solenoid brackets for side mounting or top mounting.

Q-Series Self-Recovery Winch Warranty

Ramsey Superwinch T-Max
Model Q9000 Rep 8.5e LP 8500 EW-8500
Capacity 9000 lbs 8500 lbs 8500 lbs 8500 lbs
Warranty LL/1Y LL/1Y 2Y 3Y/1Y
Gear Reduction to 1*** 212 294 235 172
Cable Diameter .375 .313 .313 .328
Cable Length 100' 95' 94' 94'
Line Speed fpm @ 8000#** 8.6 4.5 3.5* 8.2
Motor Draw @ 8000#** 300 Amps 335 Amps 320 Amps 410 Amps
Price $299.99 $529.99 $399.99 $349.99
Best in Class Score 7 2 0 0
*Rated at 8500#       **First Layer of Cable
LL= Limited Lifetime         Y= Year
*** Gear Reduction to 1, otherwise known as the "Gear Ratio". A higher numerically gear ratio will provide slower and more powerful pulling while also providing the least amount of amp draw on your battery because the winch motor doesn't need to try as hard. A lower numerically gear ratio will pull faster but also put more amp draw on your battery.


Features Included:
1 Hefty Clutch Control
2 Case Hardened Input Gears
3 Case Hardened Intermediate Gears
4 Case Hardened Output Gears
5 Stainless Steel Hardware Throughout
6 Case Hardened Hex Drive Shaft
7 Load Holding Brake System
8 Winch Drum is Case Hardened
9 High Strength Aluminum Tie Bars
10 Shaft Coupler is Case Hardened
11 Solid Copper and Brass Power Terminals
12 Durable Powder Coat Finish
13 Powerful 4.8 Horsepower Series Wound Motor
14 Heavy Duty Solenoid with 2 Bracket Locations
15 Galvanized Aircraft Cable 100' x 3/8"
16 Stainless Steel Safety Latch
17 Forged Steel Clevis Hook
18 Nylon Safety Hook Strap
19 High Visibility Rubberized Winch Remote with 12' Cord
20 Solid Copper Battery Cables
21 Zinc Plated Roller Fairlead

Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate
Installation Time: 3-4 hours
Parts Included
XRC Front Bumper with Integrated Winch Plate
XRC Rear Bumper
Installation Hardware
*Swing Out Tire Carrier if Applicable
Q9000 Winch
Zinc Plated Roller Fairlead
100' x 3/8" Aircraft Cable
Forged Steel Clevis Hook
Nylon Safety Hook Strap
12' Wire Remote Control
Remote Solenoid Box
Motor Mounted Solenoid Box Mount
Center Mounted Solenoid Box Mounts
Installation Hardware
  • Jeep Wrangler (TJ)

  • 2006 Jeep Wrangler (TJ)
  • 2005 Jeep Wrangler (TJ)
  • 2004 Jeep Wrangler (TJ)
  • 2003 Jeep Wrangler (TJ)
  • 2002 Jeep Wrangler (TJ)
  • 2001 Jeep Wrangler (TJ)
  • 2000 Jeep Wrangler (TJ)
  • 1999 Jeep Wrangler (TJ)
  • 1998 Jeep Wrangler (TJ)
  • 1997 Jeep Wrangler (TJ)
  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
  • 1990 Jeep Wrangler (YJ)
  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)
  • Jeep Wrangler Unlimited (LJ)

  • 2006 Jeep Wrangler Unlimited (LJ)
  • 2005 Jeep Wrangler Unlimited (LJ)
  • 2004 Jeep Wrangler Unlimited (LJ)

Smittybilt XRC Front & Rear Bumper with Q9000 Self Recovery Winch Options

Part NumberCatalog #Price