Smittybilt XRC Gen2 Front Bumper in Textured Black with Quadratec LED Fog Lights Kit for 07-18 Jeep Wrangler JK
Features
- Bolt On Design
- 3/16" Steel Construction
- Max solid D-ring and
- jack point mount welded on the inside and out
- Rugged Textured Finish
- Accepts factory Fog Lights
- 2-inch 120 wall
- overrider and kickers
- UHMW slip strips
- The ultimate fender-to-fender protection for rock crawling
- Light mount tabs
Fog Lights
Plug-n-play! With No Modifications!
Enjoy the experience of an improved fog light pattern with a clearer beam cutoff and brighter output. Replace those dim factory incandescent fog lamps with a Quadratec LED upgrade. Features a solid state maintenance free design with advanced photometric technology for a crisper and whiter light output that's closer to the color temperature of actual daylight. Guaranteed to deliver dramatic improvements or your money back! Lenses have a distinct customized appearance while bringing function and styling to a higher level. The rugged body construction features die-cast aluminum housings with crystal clear impact resistant polycarbonate lenses and beam height adjustment screws. The solid state electronics and powerful LEDs are protected by water tight seals. These drop-in replacements are truly plug-n-play requiring no modifications and installation takes only 20-30 minutes and uses the existing factory steering column switch to operate. Each lamp aims 2 high powered LEDs at a computer designed muti-surface reflector that disperses the light into a distinct and optimized fog beam pattern. Our exclusive design installs in place of the factory lamps using the existing mounting hardware. Once installed you'll immediately appreciate a whiter, crisper light that provides greater visibility when driving in foul weather. Our lamps meet DOT and SAE federal motor vehicle safety standards and are approved for highway use in all 50 states and come with Quadratec's 3 Year Limited Warranty. Sold in Pairs. Not compatible with 10th Anniversary or Hardrock Steel Front Bumpers.
- Features: Bumper Hoop, Integrated Fog Light Mounts, Integrated Winch Mount
- Color: Black
- Style: Mid Width Bumper
- Material: Steel
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Smittybilt XRC Gen2 Front Bumper in Textured Black with Quadratec LED Fog Lights Kit Options
| Part Number | Catalog # | Price | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 12057-2013 | 12057-2013 | 07-09 | Clear | $894.97 | |||||
| 12057-2015 | 12057-2015 | 10-17 | Clear | $894.97 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Smittybilt XRC Gen2 Front Bumper in Textured Black with Quadratec LED Fog Lights Kit Reviews
Nice solid bumper, had an issue with 2 of the welded in nuts. The powder coat filled in the threads so I had to run a tap through them. The winch mount plate is nice because you don't have to remove the bumper to install/remove the winch.
Nice solid bumper. Install time took a little longer due to the two top outside bolts would not go straight in. I think the nuts were welded at an angle thus the bolts went in at about a 15 degree angle. I had to grind one of the bolts to get it started. I finally got it in and plan to never take it out again. For my 2013 Jeep JKU all the holes lined up fine and I did not have to drill any holes as some have said. Shipping took longer than I expected. Now I have to buy a wench to fill in the big gap up front. It would be nice if they had a temporary plate that would fit over this area until one is able to purchase the winch.

































