Steer Smarts YETI XD Draglink Assembly with Griffin Attenuator for 18-24 Jeep Wrangler JL & Gladiator JT
The Steer Smarts YETI XD Draglink Assembly with Griffin Attenuator is the perfect compliment to your lifted Jeep Wrangler JL or Gladiator JT. Offering options to mount above or below the factory tapered steering knuckle. The Top mounted design is for 3.5" and higher lift kits allowing for proper steering geometry. While the bottom mount is for smaller lifts and stock applications. The top mount features a reverse taper mount system that offers a non-drill mount for a simple installation with incredible strength. Buy the best draglink available for your Jeep Wrangler JL or Gladiator JT while offering reducing the harsh negative feedback to your steering wheel. Made in USA.
For the top-mounted draglink a minimal 3.5" lift is required. Also, a track bar relocation bracket is required when flipping your draglink. The top mount draglink is not recommended for the 3.5" Metal Cloak lift.
Requires a minimal 17” wheel size with 4.5" or less backspacing for proper fitment.
Anniversary Edition Factory Skid plates require slight modification for proper clearance.
Precise Fitment:
- Left Hand Drive applications only
- Simple bolt on installation to original mounting points
Premium Ball Joint Features:
- Size - 30mm - 1 1/2 ton
- Alloy Steel Ball Studs - Induction heat treated to make it extremely strong with ultimate impact strength
- Steel on Steel Bearings - extremely durable ball joint wear resistance.
- Premium quality seals - provide long life and reliability.
- Greaseable design
Stout Draglink End Features:
- Reverse Pin Technology - prevents the linkage from flopping/rocking (built into the socket)
- Rolled Thread Size - 1 1/4"
- Forged Medium Carbon High Harden-ability Steel & Heat Treated
- E-coated and finished with a premium powdercoat
Ultimate Griffin XD Attenuator Features:
- Reduces harsh negative feedback to your steering wheel
- Draglink Adjuster Size - 1/4" thich wall 4130 Chromoly (large diameter)
- Fully adjustable once installed for easy adjustment
- E-coated and finished with a premium powdercoat
- High clearance design to eliminate potential interference
- Features: Steel
- Color: Black
Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Steer Smarts YETI XD Draglink Assembly with Griffin Attenuator Options
| Part Number | Catalog # | Price | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 78077002 | 16135-7033 | Top Mount with Stock Knuckles Non Drilled | w/ Red Boot | $699.99 | |||||
| 78077001 | 16135-7032 | Top Mount with Stock Knuckles Non Drilled | w/ Black Boot | $699.99 | |||||
| 78089002 | 16135-7035 | Bottom Mount with Stock Setup | w/ Red Boot | $699.99 | |||||
| 78089001 | 16135-7034 | Bottom Mount with Stock Setup | w/ Black Boot | $699.99 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Steer Smarts YETI XD Draglink Assembly with Griffin Attenuator Reviews
You can easily tell the difference. Paired with the track bar. And next is the drag link. My JL now drives more straight than when I first bought it before any modifications. Highly recommend it.
Questions
