The Superchips Flashcal F5 Programmer is a plug in module that is easy to use and a perfect way to address speedometer issues without breaking the bank. The Flashcal F5 Programmer is expertly designed to, among other things, accurately correct your speedometer following tire upgrades between 26” - 42”, as well as for gear/axle swaps up to 5.38. In addition, this Flashcal will adjust your engine idle for winching, sound the horn and flash exterior lighting on Keyless Locking, provide a daytime running light option and one touch lane change, read and clear diagnostic trouble codes, and can toggle your tires' TPMS on/off - all from a high-definition 2.8" color screen. Plus, the Flashcal F5 software is easily upgradable to the latest version and includes a USB cable to connect to any Windows-based computer. This application is designed to work on any JK Wrangler, however some features may only work on 2011-17 versions.
By adding the AMP'D Throttle Sensitivity Booster you can adjusts the vehicle’s throttle sensitivity, which reduces that dead pedal feeling while accelerating. Late model vehicles are built with an accelerator pedal position sensor to control engine fueling. The Amp’d Throttle Booster takes that stock signal of the accelerator and changes the mapping, which leads to a more sensitive throttle, giving access to more on-demand power. The addition of the Amp’d Power Switch allows you to adjust throttle sensitivity settings on-the-fly. AMP'd features an intuitive plug-and-play installation using your vehicles stock connections. The adjustability of settings allows you to boost signals by 50% or 100%. If your looking for an easy install, powerful throttle response, and much more tuning and drivability on the highway then Flashcal with an Amp'd Throttle Booster is the product for you!