Bestop 2-Piece Doors for 87-95 Jeep Wrangler YJ & 80-86 Jeep CJ-7, CJ-8 Scrambler with Steel Latch Pins
Description
Superdoors include all of the quality features of Supertop 2-Piece Doors. They mount to any Jeep Wrangler or CJ-7 with full-height factory doors and a Supertop or Sunrider. With these doors and your steel doors, you have ideal door configurations for all seasons: Hardtop & hard doors for Winter; Soft top and hard doors for Spring & Fall; Soft top and Superdoors for Summer. Truly the ultimate in flexibility!
Popular Similar Items
Details
2-Piece Soft Jeep doors provide protection from the elements while offering the versatility of just a lower soft door. Fits Jeep CJ (closes on steel door striker pin) and Wrangler.
2-Piece Door kits are the most versatile doors on the market and offer:
- Passenger and driver side upper and lower complete with Rotary or Paddle Handler kits.
- Compatible with Supertop®, Sunrider®, and Halftop.
- Snug fit is ensured by using adjustable lower door pins and door collars.
- Velcro to fasten upper and lower doors together.
- Double-bulb weather stripping surrounds the door to facilitate a good seal.
- Exterior fabric color matches Bestop and factory original soft tops.
- Note: The Upper half door windows from the 2-piece Superdoor set will not adapt to factory half steel doors from 1987-1995.
To keep your Bestop® 2-Piece Doors clean and protected, we suggest using Bestop® Fabric Care for unsurpassed appearance and long life.
Installation Notes
Installation Difficulty:
Level 2IntermediateTools Needed:
Safety Glasses
Phillips Screwdriver
1/8" Allen Wrench
7/16" Wrench
Utility Knife
Installation Time: 1-2 hours
Parts Included
Right Upper Door
Left Upper Door
Right Lower Door
Left Lower Door
Paddle Handles
Installation Instructions
Warranty
1 Year Limited Warranty. - Color: Black or Black Denim or Spice
*Please make a selection above to view weight, dimensions, specs of a specific product
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
Jeep CJ-8
- 1985 Jeep CJ-8
- 1984 Jeep CJ-8
- 1983 Jeep CJ-8
- 1982 Jeep CJ-8
- 1981 Jeep CJ-8
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Bestop 2-Piece Doors Options
| Part Number | Catalog # | Price | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 5178301 | 11044-01 | Black | $649.99 | ||||||
| 5178315 | 11044-15 | Black Denim | $649.99 | ||||||
| 5178337 | 11044-17 | Spice | $649.99 |
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Bestop 2-Piece Doors Reviews
Douglas B.
4/9/2025
1980 jeep cj7. great door system a little bending was required.
Empire Truck Works L.
3/21/2022
Perfect fit
Joseph A.
1/28/2022
fit perfect, top notch quality
Questions
Darrell E.
i have a 1991 yj wityh hard top and full doors what do i need to do to put half doors and soft uppers on and what parts do i need thank you
To switch your 1991 YJ from factory full steel doors and a hardtop to a setup with half doors and soft uppers, you need to address two primary obstacles: the shape of the door corners and the door latch mechanism.
Because your YJ currently runs a factory hardtop, the upper rear corners of your door openings are square. Standard soft upper doors feature a rounded rear corner designed to seal against a factory soft top.
Here is exactly what you need to do and the parts required to make this transition:
1. Choose the Right Upper Doors (Crucial for Hardtop Fitment)
If you intend to keep your factory hardtop on the Jeep while running half doors, standard soft uppers will not seal correctly. You have two options depending on your setup:
If keeping the factory hardtop installed: You must use specialized Square-Corner Soft Upper Doors (such as the Bestop element upper doors or equivalent rounded-to-square conversion uppers). These are specifically patterned with a 90-degree upper rear corner to fit the hardtop door opening geometry.
If switching to a soft top at the same time: You can use standard rounded-corner soft uppers, but you will also need to install the soft top's corresponding door surrounds to create the weather seal.
2. Swap or Adapt the Striker Pins (The Latch Problem)
Factory full steel doors use a rotary claw latch that clamps onto a thick, large-diameter latch striker bolted to your YJ's tub. The Bestop 2-Piece Doors use slim, classic steel latch pins.
The Parts Needed: You will need a set of Bestop Door Striker Brackets (Part #51251-01) or standard early-style CJ/YJ pin strikers. These bolt into the existing holes on your Jeep's B-pillar tub frame, replacing your bulky full-door strikers so the thin latch pins on the soft doors can catch securely.
3. Additional Parts Required for Lower Half Doors
If you are buying fabric upper doors to sit on top of factory-style lower steel half doors (instead of a complete fabric 2-piece door kit):
Lower Half Doors: A set of factory steel half doors or aftermarket equivalents (like Key Parts steel half door shells).
Door Hinge Inserts / Bushings: Ensure your lower hinges have intact plastic or brass inserts so the new door pins slide smoothly into your factory body hinges.
Upper Door Inserts: If using steel lower half doors, you will need the plastic grommets/inserts that press into the top rail of the lower door frame. The three vertical prongs of the soft upper doors slide directly down into these inserts.
Because your YJ currently runs a factory hardtop, the upper rear corners of your door openings are square. Standard soft upper doors feature a rounded rear corner designed to seal against a factory soft top.
Here is exactly what you need to do and the parts required to make this transition:
1. Choose the Right Upper Doors (Crucial for Hardtop Fitment)
If you intend to keep your factory hardtop on the Jeep while running half doors, standard soft uppers will not seal correctly. You have two options depending on your setup:
If keeping the factory hardtop installed: You must use specialized Square-Corner Soft Upper Doors (such as the Bestop element upper doors or equivalent rounded-to-square conversion uppers). These are specifically patterned with a 90-degree upper rear corner to fit the hardtop door opening geometry.
If switching to a soft top at the same time: You can use standard rounded-corner soft uppers, but you will also need to install the soft top's corresponding door surrounds to create the weather seal.
2. Swap or Adapt the Striker Pins (The Latch Problem)
Factory full steel doors use a rotary claw latch that clamps onto a thick, large-diameter latch striker bolted to your YJ's tub. The Bestop 2-Piece Doors use slim, classic steel latch pins.
The Parts Needed: You will need a set of Bestop Door Striker Brackets (Part #51251-01) or standard early-style CJ/YJ pin strikers. These bolt into the existing holes on your Jeep's B-pillar tub frame, replacing your bulky full-door strikers so the thin latch pins on the soft doors can catch securely.
3. Additional Parts Required for Lower Half Doors
If you are buying fabric upper doors to sit on top of factory-style lower steel half doors (instead of a complete fabric 2-piece door kit):
Lower Half Doors: A set of factory steel half doors or aftermarket equivalents (like Key Parts steel half door shells).
Door Hinge Inserts / Bushings: Ensure your lower hinges have intact plastic or brass inserts so the new door pins slide smoothly into your factory body hinges.
Upper Door Inserts: If using steel lower half doors, you will need the plastic grommets/inserts that press into the top rail of the lower door frame. The three vertical prongs of the soft upper doors slide directly down into these inserts.
Charlie D.
Will these doors fit a 1991 Wrangler YJ with original hard top?
They are not the proper seal and fit for hardtop usage. The shape of the door opening is correct but Super door is designed for fit along with the Bestop Supertop or Supertop Sunrider. Leaks and slight draft may occur and weatherstrip may not seal right with factory and aftermarket hardtops. Thanks for your inquiry.
Wayne B.
Will these doors work with a replace-a-top?
They will not. Half steel doors an factory style upper doors are a correct fit for half door models. Thanks for your inquiry.
