HyLine OffRoad 400100180 Air Dam Skid Plate in Lightly Textured Black Powder Coat for 07-18 Jeep Wrangler JK
Proudly Made 100% In USA.
- Includes Mounting Hardware
- Features laser cut openings
- Finished with black rust preventative E-Coat and lightly textured powder coat
- Fits HyLine Front Bumpers (shown with optional Winch Guard & Light Bar)
- Skid Plate weight (with hardware): 17 lbs.
Level 2IntermediateTools Needed:
Ratchet
9/16" Socket
6" Extension
9/16" Wrench
Fits HyLine Front Bumpers only.
1 Standard Air Dam
4 3/8-16"Gr. 5 Bolts
4 Lock Washers
4 Flat Washers
2 3/8" Nuts
- Features: Steel
- Color: Black
- Style: Air Dam Skid Plate
- Material: Steel
- Shipping Weight: 17lb
- Shipping Dimensions: 43in x 9in x 9in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
HyLine OffRoad Air Dam Skid Plate in Lightly Textured Black Powder Coat Reviews
Overall the product fits well once you figure out that you need to hook the back of the air dam around the cross member before installing the front bolts. The one issue I had with installation is that the rear bolt hole on the driver's side cross member, below where the vacuum pump is located, does not appear to be usable due to a weldnut tab that was used to install the bumper itself. This requires either leaving one of the 4 bolts out, or drilling through the cross member in another location, which is mentioned in the included revised instructions, but it's not clear that you have to install it that way to use all 4 bolts.
