Quadratec Smittybilt XRC Multi Optional Design (M.O.D.) Front Bumper with Q-Series Self Recovery Winch for 84-01 Jeep Cherokee XJ

Smittybilt XRC Multi Optional Design (M.O.D.) Front Bumper

Raised corners mean better entry and exit under extreme conditions. Bumpers have a one piece welded design made from a two-stage, textured, matte-black powder-coated finish. Each bumper has high-degree approach angles & raised corners for maximum ground clearance. Bumpers are manufactured out of 3/16" cold rolled steel that is robotically welded to exact specifications. The optional front bull bar is manufactured from 1.75" tubing and has two light tabs that can accommodate up to a 9" light. Its unique built-in winch plate design is capable of mounting up to a 15,000 lb winch. Other features are solid mount D-ring welds on the inside and out. D-rings sold separately.

Features

• Manufactured from 3/16 cold roll steel
• Optional Bull Bar 1.75" .120 wall over rider
• Raised corners for better entry and

exit under the most extreme conditions

• Solid Mount D-Rings - Welds on the

inside and out!

• Built in winch plate to

accommodate up to 15k winch

• One-Piece welded design
• In built Hi-Lift mount points
• Two Stage Textured Matte

Black Finish Powder Coat Finish - 5 year Limited Warranty

• Smittybilt Advantage Warranty
  
  

Quadratec Q9500i Self Recovery Winch

Now you can take advantage of Quadratec's massive purchasing power to get the lowest price of any winch in this class. Our engineers work directly with the factory to provide solutions which are specifically tailored to your Jeep®. Our powerful 4.8hp series wound motor and class leading low gear ratios give fast line speed with a Battery Friendly low current draw. You will get the most winching time from your available state of battery charge. We give you an industry best Limited Lifetime Warranty on mechanical parts and a 1 year Warranty on all electrical components. Detailed installation instructions and a handy glove compartment sized Owners Manual with Winching Guide are included.

Features Included:
1 Class Leading Line Pull Ratings for Extra Pulling Capacity
2 Heavy Cast Aluminum - Heat Dissipating Solenoid Housing
3 Pre-Assembled and Pre-Wired with Simplified Installation
4 Superior Off Road Durability with Rugged Sleek Looks
5 Hefty Clutch Control
6 Case Hardened Input Gears To HRC 30-38*
7 Case Hardened Intermediate Gears To HRC 43-48*
8 Case Hardened Output Gears To HRC 43-48*
9 Stainless Steel Hardware Throughout
10 Case Hardened Hex Drive Shaft To HRC 38-42*
11 Load Holding Brake System
12 Winch Drum is Case Hardened To HRC 55-58*
13 High Strength Aluminum Tie Bars
14 Shaft Coupler is Case Hardened To HRC 30-38*
15 Solid Copper and Brass Power Terminals
16 Durable Powder Coat Finish
17 Powerful 4.8 Horsepower Series Wound Motor
18 Heavy Duty Integrated Solenoid
19 Galvanized Aircraft Cable 100' x 3/8"
20 Stainless Steel Safety Latch
21 Forged Steel Clevis Hook
22 Nylon Safety Hook Strap
23 High Visibility Rubberized Winch Remote with 12' Cord
24 Solid Copper Battery Cables
25 Zinc Plated Roller Fairlead
* Rockwell Hardness.

Installation Notes

Installation Difficulty:

Level 2Intermediate

Installation Time: 3-5 hours

Parts Included

Front Bumper
Mounting Hardware
Q-Series Winch