Novak Conversions SK3XR Novak Adjustable Cable Style Transfer-Case Shifter Linkage for 03-06 Jeep Wrangler TJ Rubicon w/ NP 241OR RockTrac Transfer Case
Fits Rubicon transfer case model NP 242OR.
The Novak shifter's universal nature and wide range of adjustability puts the installer in control of the installation, with the design freedom needed to suit their particular situation and preferences. Body lifts, transfer case drops and other variables are easily surmounted, with its broad compatibility and ease of use. Restore and improve transfer case shifting action in Jeeps with suspension lifts and especially body lifts.
Also provides a clean shifting mechanism for conversion transmissions being adapted to the Jeep transfer cases. Eliminate shifter kick-outs that can result in transfer case damage by replacing problematic factory linkages.
- Transfer Case Model: NV241OR
- Shipping Weight: 5lb
- Shipping Dimensions: 13in x 13in x 5in (L x W x H)
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Jeep Wrangler Unlimited (TJ)
- 2006 Jeep Wrangler Unlimited (TJ)
- 2005 Jeep Wrangler Unlimited (TJ)
- 2004 Jeep Wrangler Unlimited (TJ)
Customer Submitted Photos
Novak Conversions Novak Adjustable Cable Style Transfer-Case Shifter Linkage Reviews
With a 3" lift, shifting into 4H or 4L would be problematic unless parked on a flat surface. With the cable, shifting is smooth at any angle. Removing the skid-plate is a must and if I did it again, I'd also remove the driveshaft.
I have a 2005 Rubicon with a NP241J transfer case. Although I was told by a Quadratec representative that this cable shift assembly would not fit my Jeep because it was designed for a NV241OR transfer case, I believe the two cases are very similar, if not clones built by two different companies. So I decided to take a chance that the kit would fit. The exterior case geometry where the brackets mount is very close. This cable shift kit fit fine. I had virtually no adjustments to make by following the installation instructions closely. The OEM shift linkage was in a bind because my Jeep is lifted. The cable shift assembly fixed that problem. I can now smoothly shift with ease. I believe this cable shift assembly will work for both the NV241OR and the NP241J transfer cases as it did for me.
Installed very easy, required only minor adjustment and works great.