Old Man Emu CS036R 2.5" Rear Medium Load Leaf Spring for 87-95 Jeep Wrangler YJ
Quadratec Part #:
16090-5058
Old Man Emu Part #:
CS036R
In Cart Price
$149.94
Guaranteed Best Price
$149.94
In Stock
Ships tomorrow if you order within 16 hours 30 min.
Description
Old Man Emu leaf springs are engineered to provide optimum ride performance irrespective of the operating conditions the suspension is required to work under. Numerous spring options are available to suit a multitude of applications, allowing you to set your vehicle up for recreational or commercial purposes. Feature packed, a set of Old Man Emu leaf springs matched to a set of Old Man Emu shocks will deliver vastly improved ride, handling and load carrying capability.
Bushings not included.
Popular Similar Items
Details
- Features: None
- Shocks Included: Without Shocks
- Max Tire Size: 31
- Lift Height Range: 0 - 2.5 inch
- Included Parts: Leaf Springs
- Shipping Weight: 32lb
- Shipping Dimensions: 46in x 3in x 3in (L x W x H)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Old Man Emu 2.5" Rear Medium Load Leaf Spring Reviews
Michael B.
1/2/2023
im running these in both the front and rear of my yj, good ride quality, be sure to remove the angled axle shim if using on front axle.
Carl D.
7/11/2022
Used these for a 1980 CJ 7. Better axle articulation and way better ride quality than CJ springs. Unfortunately you must buy the overpriced OME spring bushings to go with them because the spring eye that mounts to the frame is a different diameter than stock YJ ones.
Scott L.
4/25/2021
Easy to install, improved ride quality 1000% even with old shocks!
Questions
Joshua D.
What is the size of the center pin?
The Old Man Emu CS036R Rear Leaf Spring uses a center bolt with a diameter of 8mm.
Nicholas S.
What is the torque spec for the center bolt that holds them all together?
The leaf spring center pin isn't something you need to necessarily put a torque wrench on. You can use a couple c-clamps to get the leaf pack compressed together making sure the holes stay lined up, then, install the center pin. They're usually pretty soft so don't get too carried away torqueing it down. Thank you for the question.
Rob V.
Could you add the spring eye bushing size in the specs?
Frame side -37.6mm OD -19mm ID. Shackle side -31.6mm OD -18mm ID. Thanks for your inquiry.
