Quadratec 16116 0143 Maximum Duty Nitro 8.0 Rear Shock for 07-18 Jeep Wrangler JK with 1.5"-2.5" Lift
Extended Length: 25.44"
Collapsed Length: 15.06"
Extended Length: 25.44"
Collapsed Length: 15.06"
150 PSI Pressurized Nitro Gas Action
Multi Stage Velocity Sensitive Valving
Twin Tube Construction
Bonded Iron Piston
Hardened Chrome Piston Rod
Black Polyurethane Bushings
Black Polyurethane Shock Boot
Limited Lifetime Warranty
- Color: White
- Features: Nitro, Rear
- Location: Rear
- Lift Range: 0 - 2.5 inch
- Shipping Weight: 7lb
- Shipping Dimensions: 25in x 4in x 4in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Quadratec Maximum Duty Nitro 8.0 Rear Shock Reviews
4-8-2017
Excellent choice, great ride!
I added 2.5" of lift and this fit well. They were easy to install but needed some assembly, which is why I gave it 4 stars. Next time I'll spend a little more to get assembled shocks.
Good product BUT the rear top mount holes are too small for the existing hardware so I had to replace the top mount metal piece with the existing one. Cost me time, would be best imif the part was made to spec. Make sure to check before trying to mount