Sway-A-Way Front 2.5" Performance Bypass Shock Kit with Piggyback Reservoir for 07-18 Jeep Wrangler JK with 3-5" Lift

Position sensitive, external bypass technology is used to give you precise control on the road and off by incorporating multiple stages of damping as the shock cycles. At ride height, the resistance is light, giving you a comfortable ride. When the terrain turns ugly, the shock provides an increase in control to compensate. Position sensitive damping means that the farther the shock compresses, the more resistance is applied. The external bypass tubes allow you to adjust that resistance. The large diameter shock bodies provide additional cooling. The multi-stage, position sensitive damping offers unmatched control and the external bypass tubes allow precise fine tuning. The generic shocks that came with your lift kit don't come close to this level of performance.

The new 2.5 inch double bypass shocks from Sway-A-Way
fit 2007-2015 Jeep Wrangler JK models that have a 3”-5” lift
installed. The shocks bolt into the stock locations however,
the rear sway bar will need to be relocated. Sway-A-Way
has a kit for this in development or you can use the Currie
Anti-Rock rear sway bar. The new shocks are one of
several exciting new products coming from Sway-A-Way. In
addition to their 2" hydraulic bump stops that mount
inside the coil spring to replace the factory foam bumps,
development is nearly completed on a front sway-bar kit that uses the factory Rubicon
electronic disconnect.

Installation Notes

Installation Difficulty:

Level 2Intermediate

Installation Time: 1-2 hours

Installation
Instructions

Parts Included

Shocks - Pair

Warranty

1 Year Limited Warranty.