AIRAID 310-508 PowerAid Throttle Body Spacer for 04-06 Jeep Liberty KJ with 3.7L V6 Engine
The PowerAid Throttle Body Spacers from AIRAID Premium Filter Company are designed to greatly improve the low-end torque and horsepower characteristics of your engine. PowerAid accomplishes this by spacing the throttle body one inch and adding a dyno-proven Helix style bore(s). As the intake air passes through the spacer, the Helix bore creates a vortex action that improves atomization creating a more complete combustion and an efficiently burning engine. The results are improved drivability and increased fuel efficiency. The PowerAid spacer is 50 state legal, will not void your new car warranty, and can be used with any grade fuel.
Proudly Made in the USA.
CARB Notice
- 50 State Legal - CARB E.O. Number D-670-15
Level 2IntermediateTools Required:
Flat Head Screwdriver
14mm Socket
10mm Socket
8mm Socket
Ratchet & Extension
(1) Power Plate
(1) O Ring #238
(1) Throttle Cable Bracket
(2) 3/8ID x 3/4OD x .636 O.A.L. Spacers
(1) Nutplate with 3/8-16 threads
(2) 3/8-16 x 1 1/2 Hex head bolts
(3) 6mm x 50mm Hex Head Bolts
(3) 6mm Flat Washers
- Shipping Weight: 2lb
- Shipping Dimensions: 9in x 5in x 1in (L x W x H)
Jeep Liberty (KJ)
- 2006 Jeep Liberty (KJ)
- 2005 Jeep Liberty (KJ)
- 2004 Jeep Liberty (KJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
AIRAID PowerAid Throttle Body Spacer Reviews
i bought this for my jeep liberty 06 3.7 and if i didnt have the skills to make it fit it would of been hard. The screws that hold on the throttle body were short i needed to go to the hardware store and get longer m6 screws. The jeep has a guard so the adaptr it came with it didnt fit i had to get the dremel and cut off plastic off the bracket to make it fit and the other thing was that it was a black color not red as shown in the picture.