Skip to main content
Home » Jeep Electrical » Ignition System » Ignition Systems & Modules » Pertronix Performance Ignitor Ignition System
Pertronix Performance Ignitor Ignition System is no longer available
Here are some similar items you might be interested in

Pertronix Performance Ignitor Ignition System for 60-71 Jeep CJ with 134 CI F-Head

Description
With a solid-state electronic system... you will never change points again! Test results show the Ignitor delivers twice the voltage to spark plugs, increasing horsepower, fuel economy and plug life. It offers a 2:1 improvement over point type systems in current fall time for increased coil output. The system is designed for use with point-type coils, optimal performance achieved when used with Flame-Thrower 40,000 volt coil. Rotating cobalt magnets are mounted on the distributor shaft, they trigger an electronic switching module (Hall effect integrated circuit). This means no points to burn, pit or corrode, and best of all no moving parts to wear out. Electronics are molded in epoxy, eliminating deterioration from dirt, oil, grease or moisture. It all fits entirely inside the distributor, no ôblack boxö to clutter the engine compartment. No complicated wiring makes installations simple. California Resources Board E.O. #D-57-2, legal in all 50 states and Canada. This replaces old mechanical style distributors to a more modern vacume advance system.
Details
  • Jeep CJ-3B

  • 1963 Jeep CJ-3B
  • 1962 Jeep CJ-3B
  • 1961 Jeep CJ-3B
  • 1960 Jeep CJ-3B
  • Jeep CJ-5

  • 1971 Jeep CJ-5
  • 1970 Jeep CJ-5
  • 1969 Jeep CJ-5
  • 1968 Jeep CJ-5
  • 1967 Jeep CJ-5
  • 1966 Jeep CJ-5
  • 1965 Jeep CJ-5
  • 1964 Jeep CJ-5
  • 1963 Jeep CJ-5
  • 1962 Jeep CJ-5
  • 1961 Jeep CJ-5
  • 1960 Jeep CJ-5
  • Jeep CJ-6

  • 1971 Jeep CJ-6
  • 1970 Jeep CJ-6
  • 1969 Jeep CJ-6
  • 1968 Jeep CJ-6
  • 1967 Jeep CJ-6
  • 1966 Jeep CJ-6
  • 1965 Jeep CJ-6
  • 1964 Jeep CJ-6
  • 1963 Jeep CJ-6
  • 1962 Jeep CJ-6
  • 1961 Jeep CJ-6
  • 1960 Jeep CJ-6