Noram Auto Body Parts 16130-L Drivers Side Replacement Steel Rocker Panel with Lower Cowl for 76-95 Jeep CJ-7 & Wrangler YJ
Trimming and shaping may be required. Professional installation is recommended.
- Color: Bare Steel
- Location: Driver Side
- Shipping Weight: 8.4lb
- Dimensions: 45in x 20in x 3in (L x W x H)
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
- 1976 Jeep CJ-7
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Noram Auto Body Parts Drivers Side Replacement Steel Rocker Panel with Lower Cowl Reviews
Passenger side for great. Driver did not line up at all. Not sure if my tub is out of alignment or if it was this panel. Used it anyway but will require more body work to finish than the other side
Absolute junk. About as thick as aluminum foil and the profile at the bottom door edge (top of panel) doesn't line up at all. As others have said, it's better just to make your own considering the simple flat design. I should mention mine didn't arrive flat, but all bent up because it is so flimsy. I was able to straighten the piece out with my bare hands. After an hour or two of burning through trying to get it welder in with the thicker original metal, I had a stroke of genius and cut it out, then dropped it on the scrap pile. What a waste!
Panel is about half the thickness of the original sheet metal (very flimsy). Better off buying 18ga sheet metal and making you own panel/ patch.