Crown Automotive J5358677 Accelerator Cable for 79-86 Jeep CJ Series with 4.2L 258c.i. 6 Cylinder Engine & Export LHD Applications with Non Regulatory Markets
21.75" In Length.
- Engine Size: 4.2L 258ci I-6
- Engine Fuel: Gasoline
- Shipping Weight: 0.2lb
- Shipping Dimensions: 24in x 3in x 1in (L x W x H)
Jeep CJ-5
- 1983 Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
Jeep CJ-8
- 1985 Jeep CJ-8
- 1984 Jeep CJ-8
- 1983 Jeep CJ-8
- 1982 Jeep CJ-8
- 1981 Jeep CJ-8
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Accelerator Cable Reviews
I used this accelerator cable on a 1980 Jeep CJ5 with a 258 I6 left hand drive as the description reads . It fit correctly on the intake manifold mounted throttle bracket and has the right cable length draw to keep the accelerator pedal from sitting too low on the floor and allowing full acceleration . The engine is out of a 1985 Jeep CJ7 but I believe any 258 I6 with the aluminum intake manifold. And throttle bracket ought to fit the same . If the cable length of your present accelerator cable seems too long and doesn’t allow full accelerator travel , try this cable , it worked for me .
Good value and quality. Direct replacement attached with no issues. I'd buy another if I needed it tomorrow.
I ordered this cable twice and both times the cable that was sent was 24" long. The Crown part number on the packing matches, but the cable is not 21.75" long as stated in the description.
