Crown Automotive 52127833 Fuel Sending Unit Seal for 87-95 Jeep Wrangler YJ
Quadratec Part #:
55107-0901
Crown Automotive Part #:
52127833
MSRP
$6.99
Discount
-$0.70
In Cart Price
$6.29
Guaranteed Best Price
$6.29
In Stock
This item is in-stock and ready to ship.
Popular Similar Items
Details
- Engine Size: 4.0L I-6, 4.2L 258ci I-6
- Engine Fuel: Gasoline
- Shipping Weight: 1lb
- Shipping Dimensions: 6in x 5in x 1in (L x W x H)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Fuel Sending Unit Seal Reviews
Luis G.
12/28/2023
It fits!
Brian K.
10/16/2023
Fit perfect!
Randy S.
9/3/2022
Looks like the original
Questions
Richard H.
Does the fuel pump have submersible fuel line or should I replace it with a submersible fuel line
The replacement fuel pump and sending unit assembly for an 87–95 Jeep Wrangler YJ typically includes the small section of internal fuel hose connecting the pump to the sending unit bracket, but the quality of that pre-installed line varies depending on the manufacturer.
If you are replacing the entire assembly, you do not need to buy separate line unless the kit visibly lacks it. However, if you are doing a custom replacement of just the pump motor onto your existing original sending unit bracket, or if you suspect the line included in a budget aftermarket kit isn't up to par, you must absolutely use a line rated for submersibility.
Standard fuel injection hose (SAE J30R7 or J30R9) is only designed to handle fuel on the inside of the tube; the outer jacket will quickly break down, soften, and burst when constantly dunked in gasoline. You must specifically use hose rated SAE J30R10, which is engineered to resist fuel degradation on both the inside and outside of the line.
If you are replacing the entire assembly, you do not need to buy separate line unless the kit visibly lacks it. However, if you are doing a custom replacement of just the pump motor onto your existing original sending unit bracket, or if you suspect the line included in a budget aftermarket kit isn't up to par, you must absolutely use a line rated for submersibility.
Standard fuel injection hose (SAE J30R7 or J30R9) is only designed to handle fuel on the inside of the tube; the outer jacket will quickly break down, soften, and burst when constantly dunked in gasoline. You must specifically use hose rated SAE J30R10, which is engineered to resist fuel degradation on both the inside and outside of the line.
Charles C.
Will this fit a 93 with a 2.5L
Yes, it will