Daystar KJ09191BK 3/4" Comfort Ride Spacer Lift Kit for 20-24 Jeep Gladiator JT
Quadratec Part #:
16058-1034
Daystar Part #:
KJ09191BK
Description
If you want to go a little bit bigger in the tire department but do not want to sacrifice the factory ride quality of your Gladiator JT then the 3/4" Comfort Ride Spacer Lift Kit is the way to go. These quality polyurethane spacers will raise your Jeep while leveling the factory stance while maintaining load carrying capacity and ride quality so you can tackle the off-road.
Many states have laws that limit the maximum height of a lifted vehicle. Never exceed the legal height limit.
Popular Similar Items
Details
Construction: Made from heavy duty progressive rate polyurethane so you will not have metal on metal contact making them last longer.
Raises Your JT: By raising your Gladiator 3/4" you will be able to run larger tires then stock to help you taclke the trails. Even with raising your Jeep you will not sacrifice the ride quality.
Installation: This is a very simple install that should only take an hour or two, you will not need to make any modifications to your ride.
- Features: Spacer Lift
- Lift Height Range: 0 - 2.5 inch
- Included Parts: Coil Spacer
- Shipping Weight: 5lb
- Shipping Dimensions: 9in x 9in x 5in (L x W x H)
Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
Matt W.
I have a 2022 Mojave JT. Love the factory suspension and the ride. Want to increase the height a bit and take the factory rake out. Already running 35s. Just want to increase the stance a bit. Not for bigger tires, just the look. Looking for a recommendation......Thank you!
These would raise both the front and rear .75". If you wish to just remove front end rake some, they offer the .75" front leveling kit. See the following link.Daystar JT Front Leveling Kit. Thanks for your inquiry.