Skyjacker G250MSB 2.5in Front & 1in Rear Spacer Lift for 20-24 Jeep Gladiator JT
Quadratec Part #:
16004-2020
Skyjacker Part #:
G250MSB
Description
Lift and level your Jeep Gladiator JT with the Skyjacker 2.5in Front & 1in Rear Spacer Lift. This 100% bolt-on kit uses steel spacers to lift the front and rear of the Jeep. The included shock extensions allow you to reuse the factory shocks. By lifting the front of a Gladiator 2.5in and the rear by 1in, this kit will level out the factory rake in your Jeep. With a Skyjacker 2.5in Front & 1in Rear Spacer Lift, you will be able to run 35x12.50 tires on your Gladiator JT.
Many states have laws that limit the maximum height of a lifted vehicle. Never exceed the legal height limit.
Popular Similar Items
Details
Lifts & Levels: From the factory, Jeeps have a positive rake. This means the front sits lower than the rear. Not only does this kit lift Jeep, but it also levels out the rake.
Vehicle Specific Design: The Skyjacker 2.5in Front & 1in Rear Spacer Lift was specifically engineered to fit all Jeep JT Gladiators. This kit allows you to run up to 35" tires on a Gladiator.
Bolt-On Installation: With no cutting, drilling, or other modifications required, the Skyjacker 2.5in Front & 1in Rear Spacer Lift is easy to install. Because this kit uses the factory springs and shocks, this kit retains a factory style ride.
- Features: Spacer Lift
- Shocks Included: Without Shocks
- Max Tire Size: 35
- Included Parts: Bump Stop Extensions, Coil Spacer, Hardware, Shock Extensions, Sway Bar Endlinks
- Shipping Weight: 19lb
- Shipping Dimensions: 20in x 7in x 6in (L x W x H)
Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
