Skip to main content
Home » Jeep Lighting, Lenses, Bulbs » Auxiliary Lighting » Auxiliary LED Lighting » Quadratec LED Interior Mount 50” Stealth Light Bar
« Back to product
Where does it ask if you are ordering amber or white lighting? Are they both in the same lightbar?
The light bar is equipped with white and amber LEDs. Jeeps equipped with adaptive cruise control should opt for the two piece design. Thanks for your inquiry.
Any reconditions on how to better seal light bar to windshield so as light dose not shine back into cab?
Electrical tape or a bead of black urethane adhesive should be able to eliminate any light bleed that cannot be adjusted out with the included seal. Thanks for your inquiry.
Why won't this work with power glide top?
The one touch power soft top's design and mechanisms interfere with the interior light bars mounting brackets on each side. Sorry for the inconvenience.
Does the light bar need to be removed prior to having the windshield replaced?
No, it will not. Thanks for your inquiry.
Will this fit a 392?
Not if equipped with a Sky one touch power top. With hardtop or a factory convertible soft top, it will fit. Thanks for your inquiry.
Yes on the light bar for the ACC what are the dimensions for each of the two split light bars. Thanks Stephen
Each LED section is 21.5" in length on the ACC version. Thank you for the question.
Can you tell me how much of the window visibility is lost with this installed? I am 6'-3" tall so it's already a chore to see out of the windshield when I sit straight up. I love this product but fear it will cut out too much of the section of window I as a taller person need! Thanks, Jason
The JL/JT #97109-1400 Stealth Light bar blocks approximately 50mm of the clear windshield and was measured at the center vertically. There is less that is blocked at the sides. Note: The windshield has a frit that is the opaque black band around the windshield. I am not including that since you cannot see through that. Thanks for your inquiry.
Does it fit with the Sky one power roof?
No, sorry it does not. Our apologies for the inconvenience. Thanks for your inquiry.
My Gladiator does not have the ACC option, but I like the look of the split lights. Am I able to run the ACC version on a non-ACC Jeep?
Yes it can. Just know that the brackets are different, but both will work on a non acc jeep. The middle bracket between the 2 lights will be bending around nothing because there is no acc box to go around. Thanks for your inquiry.
Hi, I have a 2018 jeep sahara unlimited 4d. i am looking at the Quadratic LED interior mount stealth light. my question is, how do i know if i need the one piece bar or the two piece?
Jeeps equipped with Adaptive cruise control will need to use the 2 piece design. If you are unsure your Jeep has the ACC sensor that requires the 2 piece model, supply your Vin number and we can confirm the option your Jeep model has. Thanks for your inquiry.