Reviews for Quadratec Pre-Runner LED Light Kit for 18-25 Jeep Wrangler JL & Gladiator JT
Be warned - the wiring harness can feel like it’s impossible to disconnect. I looked up videos, pictures, everything and it ended up finally giving way after many tries. It helped make it more possible once I removed the harness from the jeep body so that it could hang free. From there the install was a breeze
Fit and Finish of the lights was excellent the hardest part was locating the connecter from above.
Price was great, functioned as intended and connection was pretty straightforward. 4 stars as the kit should really come with new fastners for the grill and wheel well liner; you will need some on hand to replace ones you break. Pittsburgh makes a large kit they should sell on this site. You will also need a 10mm socket to remove three bolts from wheel well liner and again, new fender flare and grill plastic fasteners.
The look and the plug and play aspect of this kit sold me. I prefer not modifying anything unless absolutely necessary. Install took about an hour working leisurely.
The good: looks great; mostly an easy install; no permanent modifications required.
The not so good: the instructions are OK but finding the harness connection can be a challenge; the grill inserts are not very good - all 3 partially cracked when I squeezed them per instructions - they are also tedious to get pressed into place (note to Q: have them made out of a stiff rubber and eliminate the separate grommets for the LEDs).
They look great and do operate when the running lights are on, not just the headlights. I'd buy again and would recommend them to friends. Quadratech should really do a video of a Gladiator install - that would help.
Look great, but installation was a bit more than described in the videos and the instructions. I ended up taking the fender well liner out to find the wire connections. I should also mention this was on MY 23 Rubicon.
Easy install and all connections fit with OEM connections. This is truly plug and play.
very straight forward install.. love the T harness that make these lights plug and play.. I ended up making a quick disconnect harness behind the grill so that if I ever remove the grill for any reason I won’t have to fish all the lights through the grill again, simply unplug it and remove the grill.. also I may suggest Quadratec to offer a smoked and a clear version or these LED for more custom look..
Fits well, but it is tricky to find the fender flare lighting harness. You have to peel back the wheel well liner in order to access the harness. This is not clear in the directions. Once installed, however, it looks great.
Bright, but poor instructions. Make sure you understand how much to cut. if you cut too much the light and grommet will just fall throught he mesh in the grill. The grommets need a larger flange to really be secure,
It looks really clean and very impressive, but getting the dang wiring put in took about 30 minutes. Finding the connection is hard enough; getting it unplugged so that the T-harness can get in is even worse. I was almost worried I would break the connectors. The fender liner also had to be bent so much that I was afraid I would break it. If I could give it 3.5 stars, I would. This is probably the best version of the Pre-Runner style lights that you can find for the JL, though. Made in Taiwan. It also has Quadratec's 3-year warranty, which is reassuring.