Skip to main content
Home » Jeep Wheels » Alloy Wheels » Quadratec Morphic Wheel in Satin Black 17x8.5 with 5.2in Backspace
« Back to product
Did you need a different hub ring to put them on compared to the factory rims that are currently on my 2021 Jeep Gladiator?
No. These wheels are hub-centric in design. Thanks for your inquiry,
Will my factory 245/75/17 tire fit these rims with no problems? Thanks
That size will fit nicely with the Morphic wheel. Thanks for your inquiry.
Will this rim accommodate 37x12.5 tires?
Yes, they will. The tire will need to be designed for 17" outer diameter wheels, of course. Thanks for your inquiry.
I have a 21 Gladiator Rubicon, would these work with 35x12.50 tires? Also, how far would they stick out from the fender in this configuration and/or how much wider would it be vs the stock wheel/tire?
The outer sidewall of your tire should be outward 1.71" with that change from a stock wheel and tire This will fit the 35x12.50 without rubbing. Thanks for your inquiry.
What would this offset and backspacing be compared to the stock JL sport? I run 285/70/17 tires on stock JL sport wheels. No lift. Stock suspension. Just trying to see what the difference would be compared to stock look.
.5" difference in back space and 1" added to the wheel width so your outer edge all else equal should be 1.5" The factory 17x7.5 wheel has 37.17 + offset or 5.71" of backspace. Thanks for your inquiry.
Does a 245/75R17 tire fit this rim?
Yes, it will. Thanks for your inquiry.
What is the largest size tires that can be used with this rim on a STOCK 2016 Wrangler Sport and not rub? With a leveling kit? with a 2" lift?
33 x 11.5 to 12" wide should fit the JK unmodified with the backspace the Morphic provides. 2" of lift would allow for 34-35's if you do not require extreme travel for off-roading. Thanks for your inquiry.
Could I run a 305/65/17 on a stock Sahara without a lift? Would they rub? Thank you.
Yes you could, and they will not rub. Thanks for your inquiry.
Will these fit a JL U rubicon with the dynatrac 2in lift with any rubbing or need for spacers?
It depends greatly on what tire size but you should be okay running a 35" or less like that. Thanks for your inquiry.
Will these rims work with Teraflex ST2 or ST3 Lift kit
No. Teraflex is advising 4.5" or less on wheel for use with their ST2 and ST3 lift kits. Thanks for your inquiry.