Chat with us, powered by LiveChat | Quadratec Skip to main content
Home » Jeep Wheels » Alloy Wheels » Quadratec Morphic Wheel
« Back to product
Will the morphic wheels and 35x12.5 fit my regular axle sport with 2 inch lift
Yes, they will. Thanks for your inquiry.
I have a 2021 Gladiator 80th ann. If I ran these wheels with 35X12.5X17, how much will the tires stick out from the fenders. Looking for wheels to keep the tire under the fender as much as possible
You would be going from a 6.5" backspace 18 x 7.5 wheel. This wheel mounting surface will be out 1.3" further and add an 1' for the outer edge of the wheel. https://tiresize.com/comparison/ Check the measurements of your stock equipped tire vs the one you would like to go with and compare to the baseline measurements. If you need further assistance call 800-745-6037
Can I replace the stock rims but use the stock tires with these rims on a 2009 Wrangler ?
Yes, you can do that safely. Thanks for your inquiry.
will 35/12.50 17 fit this wheel
Yes it will. Thanks for your inquiry.
Will these work with 37x12.5x17 and a 2 1/2 inch lift?
37" tires may not be completely free of a rub in tight turning situations depending on your width, most 37" should have closer to 4.5" backspace or less to clear. I would expect wheel spacers would be needed to run 37" completely rub free with the Morphic wheel. Also check your lift manufacturer advisements for safety as well. Thanks for your inquiry.
Will these cause vibration on the vehicle since some aftermarket wheels do that?
Our wheels are hubcentric, which improves the chances of not encountering imbalance issues that can come from aggressively lugged tires and improper installation from use of the wrong weights. We have not had reported issues with this wheel like the ones you mention. Thanks for your inquiry.
Would these work on a 2010 Commander? I know it’s the same 5x5 pattern but when I search the site it doesn’t show as compatible. Thanks!
So, this issue is how far they would stick out and there is no fender flare in the market for the extra 1.3" of backspace difference and the added 1" of the size of the wheel from OE. They could in theroy fit, but tire tread coverage would be a problem staying legal. Thanks for your inquiry.
I have 2019 4 door Jeep JL with AEV 2.5 lift. I’m assuming these wheels will fit without any spacers??? You mentioned your wheel is heavy duty construction so it should hold up during overlanding?
If you are running 33" this backspace should be fine, as you go up to 35" s that are wider, a backspace of 4.5" or less would be more appropriate so there is not sharp turning radius rub. Some wide 35's may need to use wheel spacers with these. It's very close. They should have trusted strength for overlanding and are hub centric. Thanks for your inquiry.
What is the load rating for these wheels?
These have a 2500lb load rating
Will the OEM TPMS sensors fit these wheels?
Yes, they do